The MSD Super Conductor wire set is designed specifically for the rigors of MINI Cooper track events and street performance. At higher cylinder pressure developed by modified and supercharged engines, more energy is needed to create ignition, and these...

This is a new 1353mm long Micro-V drive belt one step shorter than our baseline recommended length of 1353mm.  This belt is for use with the M7 Speed Supercharger 16% pulley and stock crank pulley. The reduced length of this belt adds additional...

This direct bolt-on replacement coil from MSD intensifies the spark output of your ignition. At 35,000 volts, the MSD coil adds the extra spark energy needed to fire high cylinder pressure mixtures developed by today's modified and supercharged engines...

When using the M7 Speed lightweight 4% crank pulley with the stock (non-JCW) Supercharger pulley together, it is necessary to use a longer drive belt. M7 Speed offers a correct length high performance drive belt that works perfectly with 4% crank &...

The M7 Speed 100% fiber reinforced 4-ply silicone Intercooler connector boots work great with OE or aftermarket intercoolers. These connectors are longer and a bit thicker than other aftermarket connector boots to ensure a better seal between the...

When using the M7 Speed 2% Crank pulley with the stock (non-JCW) Supercharger pulley together, it is necessary to use a longer drive belt. M7 Speed offers a correct length high performance drive belt that works perfectly with 2% crank & stock SC...

Buy 1 Water Tank & 1 Power Steering tanks | SAVE $$$ | Get a Standard 16 PSI Pressure Cap FREE! Water Tank | Direct Replacement for Plastic Factory Tank Your coolant does you no good puddled on the ground. The Gen 1 MINI suffers from a design flaw...

The M7 Speed 100% fiber reinforced 4-ply silicone Intercooler connector boots work great with OE or aftermarket intercoolers. These connectors are longer and a bit thicker than other aftermarket connector boots to ensure a better seal between the...

Direct Replacement for Plastic Factory Tank Just as the plastic coolant tank, the plastic power steering tank is mounted directly above the exhaust manifold.  And we all know how plastic and heat do not get along. Eventually your OEM tank will fail...

FX350 | 150% Increase in Holding Capacity - For STREET/STRIP/TRACK The FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the...

With well over a decade of experience, the tuning experts at M7 have carefully hand picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards. Our...

Cut down on the ever-destructive under hood heat in the engine compartment without adding complex, hard to install parts. The M7 Exhaust Heat Shield is custom contoured and fits on top of the factory aluminum heat shield above the exhaust manifold or...

Lev-R-Vent 16psi radiator cap ONLY for the R50-R53 Aluminum "Exact-Fit" Coolant Tank **WILL NOT FIT STOCK COOLANT TANK**

MAXX-G Adjustable Suspension Links add bind free travel and easy camber adjustment to the rear suspension of any MINI.  They feature a solid aluminum 1" hex adjuster sleeve with opposing 3/4" left hand & right hand threads at each end for easy...

The FX300 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or...