There are no products listed under this category.
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
What is OBD?
On-Board Diagnostics (OBD) is a term referring to a vehicle’s self-diagnostic and reporting system. Modern OBD implementations use a standardized digital communications port to provide real-time data in addition to a standardized series of diagnostic trouble codes, or DTCs, which allows a technician to rapidly identify and remedy malfunctions within the vehicle.
OBD-II was driven by a mandate by the State of California for statewide vehicle emissions testing. The US Federal Government (EPA) soon followed and the OBD-II specification was made mandatory for all cars sold in the United States beginning with the 1996 model year. The OBD electrical connector on all MINIs is located under the dashboard adjacent to the left kick panel.
If your Check Engine Light (CEL) comes on, this indicates the on-board computer(s) has sensed something is wrong or not within the preset normal operating limits. A simple plug-in OBD-II scan tool can read the DTC code(s) which will define the problem sensed by the ECU. Any big box auto parts store will read OBD-II DTC codes as a courtesy service. You can also purchase an inexpensive scan tool or OBD-II Bluetooth reader and connect to a smart phone using an app such as Torque or OBD Check.
P Codes=Powertrain (engine) related issues.
U Codes=Vehicle networking or internal CAN buss communication issues.
Known MINI OBD DTC Trouble codes are listed below:
Please note: *This list is provided as a courtesy reference only. M7 Speed does not guarantee the accuracy or completeness of the information.
| P000A | 'A' Camshaft Position Slow Response (Bank 1) |
| P0001 | Fuel Volume Regulator Control Circuit Open |
| P0003 | Fuel Volume Regulator Control Circuit Low |
| P0004 | Fuel Volume Regulator Control Circuit High |
| P0010 | VANOS intake-side solenoid valve, control-activation: Open circuit |
| P0011 | Intake Camshaft Position Timing Over-Advanced or System Performance (Bank 1) |
| P0012 | VANOS Intake: Closed-loop control fault, camshaft sticks |
| P0013 | VANOS Exhaust-side solenoid valve, control-activation: Open circuit |
| P0014 | Exhaust Camshaft Position Timing Over-Advanced or System Performance (Bank 1) |
| P0015 | VANOS Exhaust; Closed-loop control fault, position not reached |
| P0016 | Camshaft Position Sensor Correlation (Bank 1 Sensor 'A') |
| P0017 | Camshaft Position Sensor Correlation (Bank 1 Sensor 'B') |
| P0030 | HO2S Heater Control Circuit (Bank 1 Sensor 1) |
| P0031 | HO2S Heater Control Circuit Low (Bank 1 Sensor 1) |
| P0032 | HO2S Heater Control Circuit High (Bank 1 Sensor 1) |
| P0033 | Turbocharger / Supercharger Bypass Valve Control Circuit |
| P0034 | Turbocharger / Supercharger Bypass Valve Control Circuit Low |
| P0035 | Turbocharger / Supercharger Bypass Valve Control Circuit High |
| P0036 | HO2S Heater Control Circuit (Bank 1 Sensor 2) |
| P0037 | HO2S Heater Control Circuit Low (Bank 1 Sensor 2) |
| P0038 | HO2S Heater Control Circuit High (Bank 1 Sensor 2) |
| P0039 | Turbocharger / Supercharger Bypass Valve Control Circuit Range / Performance |
| P0071 | Ambient Air Temperature Sensor Circuit Range / Performance |
| P0072 | Ambient Air Temperature Sensor Circuit Low |
| P0073 | Ambient Air Temperature Sensor Circuit High |
| P007B | Charge-air temperature sensor, voltage change: Too rapid |
| P007C | Charge-air temperature sensor, electrical: Short circuit to ground |
| P007D | Charge-air temperature sensor, electrical: Short circuit to positive |
| P0087 | Fuel Rail / System Pressure - Too Low |
| P0088 | Fuel Rail / System Pressure - Too High |
| P00BC | Mass Airflow System, Plausibility: Air mass too low |
| P00BD | Mass Airflow System, Plausibility: Air mass too high |
| P0100 | Mass Air Flow or Volume 'A' Circuit |
| P0102 | Mass or Volume Air Flow Circuit Low Input |
| P0103 | Mass or Volume Air Flow Circuit High Input |
| P0107 | Manifold Absolute Pressure/Barometric Pressure Control Circuit Low Input |
| P0108 | Manifold Absolute Pressure/Barometric Pressure Control Circuit High Input |
| P0111 | Intake Air Temperature Sensor Bank 1 Temperature Range / Performance |
| P0112 | Intake Air Temperature Sensor 1 Circuit Low |
| P0113 | Intake Air Temperature Sensor 1 Circuit High |
| P0116 | Coolant Temperature Sensor rationality Check |
| P0117 | Engine Coolant Temperature Circuit Low |
| P0118 | Engine Coolant Temperature Circuit High |
| P0120 | Throttle/Pedal Position Sensor/Switch 'A' Circuit |
| P0121 | Throttle/Pedal Position Sensor/Switch 'A' Circuit Range / Performance |
| P0122 | Throttle/Pedal Position Sensor/Switch 'A' Circuit Low |
| P0123 | Throttle/Pedal Position Sensor/Switch 'A' Circuit High |
| P0128 | Coolant Thermostat (Coolant Temperature Blow Thermostat Regulation Temperature) |
| P0129 | Barometric Pressure, operating range: Pressure too low |
| P0130 | O2 Sensor before catalytic converter, electrical fault |
| P0131 | O2 Sensor Circuit Low Voltage (Bank1 Sensor 1) |
| P0132 | O2 Sensor Circuit High Voltage (Bank1 Sensor 1) |
| P0133 | O2 Sensor Circuit Slow Response (Bank1 Sensor 1) |
| P0135 | O2 Sensor Heater Circuit (Bank 1 Sensor 1): Failure to achieve operating temperature in warm-up phase. |
| P0136 | O2 Sensor after catalytic converter, electrical fault |
| P0137 | O2 Sensor Circuit Low Voltage (Bank1 Sensor 2) |
| P0138 | O2 Sensor Circuit High Voltage (Bank1 Sensor 2) |
| P0139 | O2 Sensor Circuit Slow Response (Bank1 Sensor 2) |
| P013A | O2 Sensor behind catalytic converter, dynamic response, from lean to rich, Slow response |
| P013E | O2 Sensor Delayed Response - Rich to Lean (Bank 1 Sensor 2) |
| P0140 | O2 Sensor after catalytic converter, electrical: Heating-cycle coupling to signal |
| P0141 | O2 Sensor behind catalytic converter, operation: Internal resistance too high |
| P0148 | Fuel Delivery Error |
| P0171 | System Too Lean (Bank 1) |
| P0172 | System Too Rich (Bank 1) |
| P0190 | Fuel Rail Pressure Sensor 'A' Circuit |
| P0192 | Fuel Rail Pressure Sensor 'A' Circuit Low |
| P0193 | Rail-pressure sensor, electrical: Short circuit to positive |
| P0201 | Injector Circuit/Open - Cylinder 1 |
| P0202 | Injector Circuit/Open - Cylinder 2 |
| P0203 | Injector Circuit/Open - Cylinder 3 |
| P0204 | Injector Circuit/Open - Cylinder 4 |
| P0221 | Throttle/Pedal Position Sensor/Switch 'B' Circuit Range/Performance |
| P0222 | Throttle/Pedal Position Sensor/Switch 'B' Circuit Low |
| P0223 | Throttle/Pedal Position Sensor/Switch 'B' Circuit High |
| P0234 | Boost pressure control, upper value: Boot pressure too high |
| P0237 | Turbocharger Boost Sensor 'A' Circuit Low |
| P0238 | Turbocharger Boost Sensor 'A' Circuit High |
| P023B | Turbocharger 'A' Overboost Condition |
| P023C | Charge Air Cooler Coolant Pump Control Circuit High |
| P0244 | Turbocharger Wastegate Solenoid 'A' |
| P0245 | Turbocharger Wastegate Solenoid 'A' Low |
| P0246 | Turbocharger Wastegate Solenoid 'A' High |
| P0261 | Cylinder 1 Injector Circuit Low |
| P0262 | Cylinder 1 Injector Circuit High |
| P0264 | Cylinder 2 Injector Circuit Low |
| P0265 | Cylinder 2 Injector Circuit High |
| P0267 | Cylinder 3 Injector Circuit Low |
| P0268 | Cylinder 3 Injector Circuit High |
| P0270 | Cylinder 4 Injector Circuit Low |
| P0271 | Cylinder 4 Injector Circuit High |
| P0299 | Boost-pressure control, lower value: Boost pressure too low |
| P0300 | Combustion miss, multiple cylinders; multiple cylinders: Fuel injection deactivation: Increased exhaust emissions |
| P0301 | Cylinder 1 Misfire Detected |
| P0302 | Cylinder 2 Misfire Detected |
| P0303 | Cylinder 3 Misfire Detected |
| P0304 | Cylinder 4 Misfire Detected |
| P0324 | Knock Control System Error |
| P0327 | Knock Sensor 1 Circuit Low (Bank 1 or Single Sensor) |
| P0328 | Knock Sensor 1 Circuit High (Bank 1 or Single Sensor) |
| P0335 | Crankshaft Position Sensor 'A' Circuit |
| P0336 | Crankshaft Position Sensor 'A' Range |
| P0340 | Camshaft Position Sensor 'A' Circuit Bank (Bank 1 or Single Sensor) |
| P0341 | Intake camshaft sensor: Signal implausible |
| P0342 | Intake camshaft position sensor: Signal too low |
| P0343 | Intake camshaft sensor: Signal is high |
| P0351 | Ignition Coil 'A' Primary / Secondary Circuit |
| P0352 | Ignition Coil 'B' Primary / Secondary Circuit |
| P0353 | Ignition Coil 'C' Primary / Secondary Circuit |
| P0354 | Ignition Coil 'D' Primary / Secondary Circuit |
| P0365 | Camshaft Position Sensor 'B' Circuit (Bank 1) |
| P0366 | Exhaust camshaft sensor: signal implausible |
| P0367 | Exhaust camshaft sensor: Signal too low |
| P0368 | Exhaust camshaft sensor: Signal too high |
| P053C | Positive Crankcase Ventilation Heater Control Circuit High (Check PCV Electrical connector(s)) |
| P1000 | VANOS-System Min. Stroke Adaptation Number of Stops Exceeded |
| P1004 | VANOS Guiding Sensor Solenoid Loss (Bank 1) |
| P1005 | VANOS Guiding Sensor Reset Error (Bank 1) |
| P1006 | VANOS Eccentric Shaft Sensor Parity Error (Bank 1) |
| P1007 | VANOS Eccentric Shaft Sensor Gradient Error (Bank 1) |
| P1012 | VANOS Guiding Sensor Solenoid Loss (Bank 1) |
| P1013 | VANOS Reference Sensor Reset Error (Bank 1) |
| P1014 | VANOS Eccentric Shaft Sensor Parity Error (Bank 1) |
| P1015 | VANOS Eccentric Shaft Sensor Gradient Error (Bank 1) |
| P1017 | VANOS actuator motor, position sensors: Signal Implausible |
| P1019 | VANOS Supply Voltage Sensors High Input (Bank 1) |
| P101A | VANOS, adjustment range: Travel range not initialized |
| P101B | VANOS Self-Learning Function Storage of Learning Values in EEPROM Not Possible |
| P101C | VANOS Load Shedding Relay Control Circuit Input High |
| P101D | VANOS Load Shedding Relay Control Circuit Input Low |
| P101E | VANOS Load Shedding Relay Control Circuit Input |
| P1020 | VANOS Sensor Supply Voltage Low Input (Bank 1) |
| P1023 | VANOS, adjustment range: Range check, deviation from base learning routine |
| P1024 | VANOS Self Learning Function Faulty Lower Learning Range (Bank 1) |
| P1025 | VANOS Self Learning Function No Positions Stored (Bank 1) |
| P1030 | VANOS Control Motor Position Control Deviation (Bank 1) |
| P1031 | VANOS Actuator Monitoring Recognition of Direction of Rotation Plausibility (Bank 1) |
| P1047 | VANOS Control Circuit High (Bank 1) |
| P1048 | VANOS Control Circuit Low (Bank 1) |
| P1049 | VANOS Control Circuit Short |
| P1050 | VANOS actuator motor, control-activation: Open circuit |
| P1056 | VANOS Control Circuit High (Bank 1) |
| P1057 | VANOS Motor Supply Voltage (Bank 1) |
| P105C | VANOS Control Motor Tight |
| P105D | Cold Start Intake Air Temperature - Too Low |
| P1062 | VANOS Limp Home Request Full Stroke Position Reached (Bank 1) |
| P1063 | VANOS Limp Home Request Air Mass Plausibility (Bank 1) |
| P1077 | VANOS Overload Protection Control Motor Input Temperature (Bank 1) |
| P1078 | VANOS Overload Protection Current Too High (Bank 1) |
| P10B0 | Charge air temperature: Plausibility, temperature too high |
| P10B8 | Charge air temperature: Signal, remains stationary |
| P10CE | Rail-pressure sensor, operating range: Pressure to high |
| P10CF | Rail-pressure sensor, operating range: Pressure to low |
| P10D0 | Charge air temperature sensor, plausability, cold start: Temperature too high |
| P10D1 | Charge air temperature sensor, plausability, cold start: Temperature too low |
| P10D4 | Coolant temperature sensor, plausability, cold start: Temperature too low |
| P10D5 | Coolant temperature sensor, plausability, cold start: Temperature too high |
| P10D9 | Rail-pressure sensor, signal: No variation |
| P10DE | VANOS, adjustment range: Initial learning outside tolerance |
| P10DF | VANOS, driver circuit component protection: System deactivation |
| P10E1 | VANOS system, No motion detected |
| P10E2 | VANOS actuator motor, position sensors: Short circuit or line break (open circuit) |
| P10E5 | DME, internal fault, VANOS control: Malfunction |
| P10E6 | VANOS actuator motor, position sensors: Malfunction in voltage supply |
| P10E7 | VANOS, overload protection: Driver circuit overloaded |
| P10E8 | VANOS, overload protection: Actuator motor overloaded |
| P10F2 | Boost pressure - barometric pressure, comparison: Boost air pressure too high |
| P10F3 | Boost pressure - barometric pressure, comparison: Boost air pressure too low |
| P1104 | Differential Pressure Sensor Intake Manifold Pressure Too Low (Bank 1) |
| P1105 | Differential Pressure Sensor Intake Manifold Pressure Too High (Bank 1) |
| P110D | Throttle Position Sensor 'A' and 'B' Range / Performance |
| P110E | Internal Code (Service / End-of-line Test) |
| P110F | Ambient Temperature Sensor Faulty CAN Signal |
| P111A | Mass or Volume Air Flow va O2 Sensor Too High (Bank 1) |
| P111B | Mass or Volume Air Flow va O2 Sensor Too Low (Bank 1) |
| P111E | Intake Temperature Sensor Bank 1 Maximum Temperature Implausible |
| P1124 | Differential Pressure Sensor Intake Manifold Pressure Offset (Bank 1) |
| P112B | Engine Coolant Temperature Sensor 1 Minimum Temperature Implausible |
| P112E | Throttle valve angle - Intake manifold pressure, comparison: Pressure too low |
| P112F | Manifold Absolute Pressure to Throttle Angle - Too High |
| P113A | Mass or Volume Air Flow 1 Correction Signal Plausibility Too Long |
| P113B | Mass or Volume Air Flow 1 Correction Signal Plausibility Too Long |
| P115A | Mass or Volume Air Flow 'A' Maximum Exceeded |
| P115B | Mass or Volume Air Flow 'A' Minimum Fallen Below |
| P115C | Mass or Volume Air Flow 'A' Too Low |
| P115D | Mass or Volume Air Flow 'A' Too High |
| P115F | Throttle / Pedal Position Sensor / Switch 'A' / 'B' Synchronous Operation Correlation (Bank 1) |
| P116F | Air Mass Sensor Signal Electrical |
| P118A | Engine Oil Separator Heating Circuit High |
| P118B | Engine Oil Separator Heating Circuit Low |
| P118C | Engine Oil Separator Heating Circuit Open |
| P1197 | Differential Pressure Sensor Intake Manifold High Input (Bank 1) |
| P1198 | Differential Pressure Sensor Intake Manifold Low Input (Bank 1) |
| P1199 | Differential Pressure Sensor Intake Manifold Low Input (Bank 1) |
| P119A | Manifold Absolute Pressure Sensor High (Bank 1) |
| P119B | Manifold Absolute Pressure Sensor Low (Bank 1) |
| P119D | Fuel trim, Injector aging long term adaptation too high (Bank 1) |
| P11AA | Throttle valve, operation: Resistance to motion, too slow |
| P11CB | arometric pressure, operating range: Pressure too high |
| P1216 | Fuel Pump Emergency Operation |
| P1247 | Barometric Pressure, operating range: Pressure implausible |
| P1250 | Manifold Absolute Pressure Too High |
| P1255 | Manifold Absolute Pressure Too Low |
| P1260 | Boost Pressure Control, deactivation: Boost pressure build-up blocked |
| P1296 | Boost Pressure Control, Boost Pressure too high |
| P1297 | Boost Pressure Control, Boost Pressure too low |
| P129D | Manifold Absolute Pressure Maximum Pressure Implausible |
| P129E | Manifold Absolute Pressure Minimum Pressure Implausible |
| P12A0 | Turbocharger Boost Pressure, Pressure Front of Throttle Valve too High |
| P12A1 | Turbocharger Boost Pressure, Pressure Front of Throttle Valve too Low |
| P12A2 | Turbocharger Boost Pressure, Maximum Pressure Front of Throttle Valve Implausible |
| P12A3 | Turbocharger Boost Pressure, Minimum Pressure Front of Throttle Valve Implausible |
| P12A5 | Absolute Pressure Sensor, intake manifold, plausibility, shutdown phase : Pressure too high |
| P12A8 | Boost Pressure Sensor, plausibility, shutdown phase : Pressure too low |
| P12A9 | Boost Pressure Sensor, plausibility, shutdown phase : Pressure too high |
| P12B8 | Barometric Pressure Sensor, plausibility, shutdown phase : Pressure too low |
| P12B9 | Barometric Pressure Sensor, plausibility, shutdown phase : Pressure too high |
| P12DA | Boost Pressure - barometric pressure, comparison: Boost pressure too high |
| P12DB | Boost Pressure - barometric pressure, comparison: Boost pressure too low |
| P1338 | Intake Camshaft: Angular offset to crankshaft is outside tolerance range |
| P1339 | Exhaust Camshaft: Angular offset to crankshaft is outside tolerance range |
| P136C | Knock Control Super Knocking Detected |
| P137A | Knock Control Super Knocking Caused by Defective Ignition Coil |
| P137B | Knock Control Super Knocking Caused by Defective Knock Sensor |
| P137D | Knock Control Torque Limitation Caused by Too High Number of Super Knocking |
| P137E | Knock Control Permanent Limitation Caused by Too High Number of Super Knocking |
| P137F | Knock Control Fuel Cutoff Due to Super Knocking |
| P13A0 | Knock Control Fuel Cutoff Due to Super Knocking Cylinder 1 |
| P13A1 | Knock Control Fuel Cutoff Due to Super Knocking Cylinder 2 |
| P13A2 | Knock Control Fuel Cutoff Due to Super Knocking Cylinder 3 |
| P13A3 | Knock Control Fuel Cutoff Due to Super Knocking Cylinder 4 |
| P13AE | Knock sensor, electrical: Signal input 'A', short circuit to ground |
| P13AF | Knock sensor, electrical: Signal input 'A', short circuit to positive |
| P13B8 | Knock sensor, electrical: Signal input 'B', short circuit to ground |
| P13B9 | Knock sensor, electrical: Signal input 'B', short circuit to positive |
| P13C0 | VANOS intake: Closed loop control fault, camshaft sticks |
| P13C9 | VANOS intake: Closed loop control fault, camshaft sticks |
| P13CA | Exhaust camshaft, mechanical: Assembly faulty |
| P13CB | Exhaust camshaft, mechanical: Incorrect installation |
| P13EA | Ignition-angle adjustment at part load, cold start: Ignition angle advanced too far |
| P1497 | Downstream Throttle Air Leak; Unetered air (Vacuum Leak!) |
| P150A | Battery Sensor Extended Communication Circuit |
| P150B | Battery Sensor Serial Data Interface |
| P150C | Intelligent battery sensor, signal: Software fault |
| P15DF | Fuel Rail Pressure Too Low-Cold Start Cycle |
| P16E9 | Faulty Engine Control Module (DME) or programming |
| P2088 | VANOS intake side solenoid valve, control activation: Short circuit to ground |
| P2089 | VANOS intake side solenoid valve, control activation: Short circuit to positive |
| P2090 | VANOS exhaust side solenoid valve, control activation: Short circuit to ground |
| P2091 | VANOS exhaust side solenoid valve, control activation: Short circuit to positive |
| P2096 | Before catalyst oxygen sensor, system check: Signal stuck at rich |
| P2097 | Before catalyst O2 Sensor, system check: Signal stuck at lean |
| P2100 | Throttle Actuator 'A' Control Motor Circuit Open |
| P2102 | Throttle Actuator 'A' Control Motor Circuit Low |
| P2103 | Throttle Actuator 'A' Control Motor Circuit High |
| P2118 | DME, Internal Fault, throttle valve control: Overheated or current too high |
| P2120 | Throttle / Pedal position sensor 'D' Circuit |
| P2122 | Throttle / Pedal position sensor 'D' Circuit Low |
| P2123 | Throttle / Pedal position sensor 'D' Circuit High |
| P2127 | Throttle / Pedal position sensor 'E' Circuit Low |
| P2128 | Throttle / Pedal position sensor 'E' Circuit High |
| P2138 | Throttle / Pedal position sensor 'D ' 'E' Voltage Correlation |
| P213F | Fuel Pump Emergency Cut Off |
| P2146 | Fuel Injector Group 'A' Supply Voltage Circuit Open |
| P2147 | Fuel Injector Group 'A' Supply Voltage Circuit Low |
| P2148 | Fuel Injector Group 'A' Supply Voltage Circuit High |
| P2177 | Fuel Trim Limit Exceeded System too lean |
| P2178 | Fuel Trim Limit Exceeded System too rich |
| P2187 | System too lean at idle (Bank 1) |
| P2188 | System too rich at idle (Bank 1) |
| P2195 | Pre-catalyst O2 Sensor stuck lean (Bank 1 Sensor 1) |
| P2196 | Pre-catalyst O2 Sensor stuck rich (Bank 1 Sensor 1) |
| P2228 | Barometric Pressure Sensor 'A' Circuit Low |
| P2229 | Barometric Pressure Sensor 'A' Circuit High |
| P2237 | O2 Sensor Reference Circuit Continuity (Bank 1 Sensor 1) |
| P2243 | O2 Sensor Reference Voltage Circuit Open (Bank 1 Sensor 1) |
| P2251 | O2 Sensor before catalytic converter, electrical: Open Circuit, virtual ground |
| P2270 | O2 Sensor Signal Stuck Lean (Bank 1 Sensor 2) |
| P2271 | O2 Sensor Signal Stuck Rich (Bank 1 Sensor 2) |
| P2414 | O2 Sensor before catalytic converter, installation: Sensor is not installed correctly in exhaust system |
| P2421 | EVAP evaporative emissions valve: Sticks in closed position |
| P2422 | EVAP evaporative emissions valve: jammed open |
| P2510 | ECM/PCM Power Relay Sense Circuit Range / Performance |
| P2600 | Coolant Pump 'A' Control Circuit Open |
| P2602 | Coolant Pump 'A' Control Circuit Low |
| P2603 | Coolant Pump 'A' Control Circuit High |
| P2610 | Engine shutdown time: Signal implausible |
| P2626 | O2 Sensor Pumping Circuit Open (Bank 1 Sensor 1) |
| P2637 | Torque Management Feedback Signal 'A' |
| P2719 | Pressure Control Solenoid 'D' Control Circuit Range / Performance |
| P2762 | Torque Converter Clutch Pressure Control Solenoid Control Circuit Range / Performance |
| P2763 | Torque Converter Clutch Pressure Control Solenoid Control Circuit High |
| P2764 | Torque Converter Clutch Pressure Control Solenoid Control Circuit Low |
| P2885 | Boost Pressure Control Deviation, plausibility (low or high boost pressure detected) |
| P3007 | Fuel Rail Pressure, Preassure-Rate-Controlled, Maximum Pressure Exceeded |
| P3012 | Adaptation Value too high (Bank 1 Sensor ) |
| P3014 | O2 Sensor IC supply Voltage too Low (Bank 1 Sensor 1) |
| P3016 | O2 Sensor Ceramic Internal Resistance Adjusted Value Plausibility (Bank 1 Sensor 1) |
| P3018 | O2 Sensor before catalytic converter, pumping current wire: Oxygen sensor control valve above threshold due to open pump wire |
| P301A | Injector 1 Stuck Open |
| P301B | Injector 2 Stuck Open |
| P301C | Injector 3 Stuck Open |
| P301D | Injector 4 Stuck Open |
| P3020 | O2 Sensor pre catalytic converter Signal too low during coast down fuel cut off |
| P3022 | DME, internal fault, O2 Sensor before catalytic converter: Communication fault |
| P3024 | DME, internal fault, O2 Sensor before catalytic converter" Initialization fault |
| P3026 | O2 Sensor pre catalytic converter operating temperature not reached |
| P302A | High pressure fuel system, fuel pressure, maximum pressure exceeded |
| P302C | High pressure fuel system, fuel pressure, pressure falls below minimum threshold |
| P306A | Fuel system: Pressure too high, emergency running mode with low pressure |
| P306C | Fuel system: Pressure briefly too high, RPM and load factor limited |
| P306F | Fuel pressure: Pressure drop below minimum, injection deactivation to protect catalyst |
| P3091 | Fuel Rail Pressure Pressure-Rate-Controlled, fallen below minimum pressure |
| P3100 | Cylinder 1 High Pressure Injector Low Side Circuit Open |
| P3101 | Cylinder 1 High Pressure Injector Low Side Circuit Low |
| P3102 | Cylinder 1 High Pressure Injector Low Side Circuit High |
| P3103 | Cylinder 1 High Pressure Injector Low Side Booster Time Error |
| P3104 | Cylinder 2 High Pressure Injector Low Side Circuit Open |
| P3105 | Cylinder 2 High Pressure Injector Low Side Circuit Low |
| P3106 | Cylinder 2 High Pressure Injector Low Side Circuit High |
| P3107 | Cylinder 2 High Pressure Injector Low Side Booster Time Error |
| P3108 | Cylinder 3 High Pressure Injector Low Side Circuit Open |
| P3109 | Cylinder 3 High Pressure Injector Low Side Circuit Low |
| P3110 | Cylinder 3 High Pressure Injector Low Side Circuit High |
| P3111 | Cylinder 3 High Pressure Injector Low Side Booster Time Error |
| P3112 | Cylinder 4 High Pressure Injector Low Side Circuit Open |
| P3113 | Cylinder 4 High Pressure Injector Low Side Circuit Low |
| P3114 | Cylinder 4 High Pressure Injector Low Side Circuit High |
| P3115 | Cylinder 4 High Pressure Injector Low Side Booster Time Error |
| P3148 | Cylinder 1 High Pressure Injector High Side Circuit Shorted to Coil |
| P3149 | Cylinder 1 High Pressure Injector Low Side Circuit Low |
| P3150 | Cylinder 1 High Pressure Injector Low Side Circuit High |
| P3151 | Cylinder 2 High Pressure Injector High Side Circuit Shorted to Coil |
| P3152 | Cylinder 2 High Pressure Injector Low Side Circuit Low |
| P3153 | Cylinder 2 High Pressure Injector Low Side Circuit High |
| P3154 | Cylinder 3 High Pressure Injector High Side Circuit Shorted to Coil |
| P3155 | Cylinder 3 High Pressure Injector Low Side Circuit Low |
| P3156 | Cylinder 3 High Pressure Injector Low Side Circuit High |
| P3157 | Cylinder 4 High Pressure Injector High Side Circuit Shorted to Coil |
| P3158 | Cylinder 4 High Pressure Injector Low Side Circuit Low |
| P3159 | Cylinder 4 High Pressure Injector Low Side Circuit High |
| P316B | Engine Coolant Temperature Signal Stuck Low |
| P3198 | Engine Coolant Temperature Gradient too High |
| P3199 | Engine Coolant Temperature Signal Stuck |
| P3202 | Powertrain CAN communications fault: CAN bus off or CAN bus defective |
| P3209 | CAN message monitoring ASC/DSC Alive check |
| P3210 | CAN monitoring ASC / DSC plausibility |
| P3214 | CAN message monitoring ETC plausibility |
| P3215 | CAN message monitoring IHKA No Signal |
| P3217 | CAN message instrument pack plausibility |
| P3219 | CAN message SZL alive check |
| P321E | Ambient pressure sensor maximum pressure implausible |
| P321F | Ambient pressure sensor minimum pressure implausible |
| P3220 | CAN Message SZL no signal |
| P3221 | CAM Message Monitoring SZL Plausibility |
| P3223 | Generator Mechanical |
| P3323 | Alternator, mechanical: Malfunction |
| P3225 | Generator Communication Error |
| P322A | Ambient Pressure Sensor Continuity |
| P3232 | Control Module Monitoring Ignition Timing Plausibility |
| P3233 | Control Module Monitoring Relative Charge Plausibility |
| P3235 | Control Module Monitoring Version coding plausibility |
| P3236 | Control Module Monitoring Injection time relative fuel quantity plausibility |
| P3237 | Control Module Monitoring Fuel Correction Error |
| P3238 | Control Module Monitoring TPU Chip defective |
| P3239 | Control Module - No Coding |
| P323C | Ambient pressure sensor continuity error |
| P323D | Control Module Monitoring Air Mass Flow Balancing, Control Ramge Monitoring |
| P323E | Control Module Monitoring Fuel Pressure Sender |
| P324A | Alternator: Incorrect Type |
| P324C | Alternator, plausibility, temperature, over temperature calculated |
| P324E | Alternator, regulator: incorrect type |
| P325A | Alternator, plausibility, electrical: Calculated |
| U0001 | High Speed CAN Communication Bus |
| U1001 | Lost communication with TCM |
| U0121 | Lost communication with Anti-lock Brakes System (ABS) Control Module |
| U0167 | Lost communication with vehicle immobilizer control module |
| U110F | PT CAN. message (EGS torque request, 0xB5): omitted |
| U1115 | Lost communication with Vehicle Mode Status |
| U1116 | Message monitoring vehicle mode status checksum error |
| U1118 | PT CAN, message (speed of vehicle. 0x1A0): omitted |
| U111A | PT CAN. message (transmissiondata, 0xBA): Missing |
| U111E | Lost communication with Teerminal Status |
| U111F | Message monitoring terminal status checksum error |
| U1126 | PT CAN, message (Status of DSC, 0x19E): Missing |
| U1129 | Lost communication with reverse status |
| U112A | Message monitoring instrument pack status alive check |
| U112B | Lost communication with instrument pack status |
| U112D | Lost communication with control crash cut off EKP |
| U112E | Lost communication with pedal position sensor |
| U1132 | No BSD message from generator |
| U1134 | Lost communication with Lamp Status |
| U113C | Lost communication with Time / Date |
| U114A | Message monitoring engine control torque 1 alive check |
| U114B | Lost communication with Engine Control Torque 1 |
| U114C | Message monitoring Engine Control Torque 1 Checksum error |
| U115A | Message monitoring engine control torque 3 alive check |
| U115B | Lost communication with Engine Control Torque 3 |
| U115C | Message monitoring Engine Control Torque 3 Checksum error |
| U115E | Lost communication with Engine Data |
| U1166 | Message monitoring EWS (Electronic immobilizer) - Frame error |
| U1169 | Lost communication with OBD-Sensor |
| U116D | PT CAN, message (wheel speed, 0x0CE): missing |
| U116F | Lost Communication with Sports Mode ETC |
| U1173 | PT CAN, message (transmission data, 0x0BA): checksum fault / alive check |
| U11C9 | PT CAN, message (EGS torque request, 0xB5): Checksum fault / alive check |
| U11CA | PT CAN, message (speed of vehicle, 0x1A0): Checksum fault / alive check |
| U1202 | Message Monitoring TCM Alive Check |
There are no products listed under this category.