NEW and IMPROVED FOR HIGHER CRANKCASE VELTILATION FLOW RATES AND IMPROVED OIL SEPERATION. One Piece 1/2" diameter molded silicone hoses available in RED or BLACK

The NEW & IMPROVED Oil Catch Can kit for R55 through R59 MINIs equipped with the N18B engine comes with our NEW 1/2" diameter one piece molded hoses available in BLACK or RED. The kit features a "designed-to-fit" stainless steel bracket, mounting hardware and the NEW custom molded large 1/2" diameter hoses. Installation is super easy...no drilling and no special tools are needed. NOTE: This kit will fit on the firewall directly behind the outlet of the stock or aftermarket airbox.  It uses the factory tab located on the firewall. Fitment is guaranteed.

Oil separation is accomplished inside the can using coalescing separation technology.  This system combines the small mist droplets coming from the engine crankcase into larger and heavier drops.  Gravity then pulls the heavy drops out of the flow stream and into the reservoir for collection. The cleaned airflow is then directed out of the OCC system and into the intake hose for recirculation.  Test results show up to 95% of the oil is removed from the PCV system with the M7 system in place. Baffles are not required because the airflow within the PCV system is very low. (less than 1 CFM)  At these extremely low flow rates baffles would not separate mist. Baffles are met to redirect flow within a closed chamber. (as in in a muffler)

"Forum experts and social hysteria" say an OCC is not needed but we beg to differ. Why do so many MINI owners suffer from carbon buildup on their intake valve? The answer is oil being recycled through the intake tract to be burned. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup which leads to performance-hindering oil film and sludge along your intake tract, on your engine control sensors and on your engine's intake valves.

Because the 2007 & up MINI is a direct injection engine, the intake valves do not benefit from the cleaning action provided by the gasoline as in older port injection engines. Now all the oil blow-by burns and sticks to the intake valves and builds up into a flow choking hydrocarbon mess.  The end result is loss of power and a very expensive repair bill. This oil film & sludge can appear in other critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical for maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance.

By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures that oil film and sludge will not become a factor in your vehicle's performance. If you don't think your engine is pumping oil back through your intake system, remove the breather tube and look at all the oil!.  The breather tube connects directly to you intake hose and directs this oily mess back through your engine to be burned.

Now with our exclusive "Exact-Fit" 1/2" diameter molded silicone rubber hose kit and brackets makes installation super-easy for the DIYer

Features:

• 100% Precision CNC machined from aircraft grade billet aluminum.
• Robust design. All leak paths are o-ring sealed.
• ZERO leakage GUARANTEED!  No Check Engine Lights (CEL or DTC codes)
• Overall Dimensions
• 2.7" [69mm] diameter]
• 4.1" [105mm tall]
• Holds 4.5 fl. oz. [132 ml]
• Features a threaded and sealed dipstick to easily check reservoir level.
• Bright black anodized for corrosion protection.
• NEW high flow 1/2" diameter one piece molded hoses available in BLACK or RED.
• Stainless steel bracket and mounting hardware.

Benefits:

• Eliminate intake tract oil contamination, carbon build-up and intake valve damage.
• Prevent premature sensor failure and distructive detionation.
• Keep engine performance at peak levels.
• Removes up to 95% of the oil contained in the PCV airflow.

The M7 Oil Catch Can is not only functional is a work of automotive performance ART! It is CNC machined from billet aluminum and adds a sharp look to your engine compartment.

All hoses, brackets, clamps, necessary fittings and easy to follow detailed step-by-step instructions are included, including an oil drain plug and an easy to view sight tube. The sight tube lets you know the amount of oil in the can. The hoses are high quality "Made in the USA" automotive grade designed to withstand the rigors of the under-hood environment and to not degrade when exposed to oil. Beware of other "low cost" catch can systems that do not perform. By the best....Buy M7 Speed products! We are MINI Performance experts:

Engineered.....Tested.....& Proven to PERFORM!