Forced Induction

Specifications: Compressor Inducer - 59.9 mm, Compressor Exducer - 85.0 mm / Trim: 49.0, Turbine Inducer - 69.8 mm, Turbine Exducer - 76.2 / Trim: 83.9 mm, Turbine Housing: 1.15Billet Wheel: The compressor features a gold anodized 9 bladed billet...

BorgWarner Turbocharger SX K03 Mini Cooper S EP6 HP Upgrade

Furthermore, these benefits won't cost you the Earth! Rather than throwing the entire factory diverter valve system in the trash (like other manufacturer's "solutions"), the DV+ keeps what works, and replaces what doesn't. It retains the factory solenoid...

Like all valves in the DV+ family, the T9382 offers significant benefits over factory-fitted electronic diverter valves – sharper throttle response, faster boost recovery on gearshift or brief throttle lifts, improved boost holding, and unrivalled...

M7 Speed introduces their new Cold Side Lower Intercooler Elbow for all Generation 2 MINI Coopers equipped with a 1.6 liter turbocharged engine. This new OE replacement elbow is made from the same high quality four-ply fabric reinforced 100% silicone...

The M7 Pre-Intercooler Charge Pipe for the R60-R61 MINI platform is a high flow 100% silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM hose has an inline...

This elbow designed to be used with M7 Speed's MAXX-FLO Intake System. It measures 3" on the housing end and 2.75" at the MAF sensor end. The bend is 80 degrees for a perfect fit to the OE MINI intake hose system. It comes complete with two proper sized...

This elbow designed to be used with M7 Speed's MAXX-FLO Intake System. It measures 3" on the housing end and 2.75" at the MAF sensor end. The bend is 80 degrees for a perfect fit to the OE MINI intake hose system. It comes complete with two proper sized...

This elbow designed to be used with M7 Speed's MAXX-FLO Intake System. It measures 3" on the housing end and 2.75" at the MAF sensor end. The bend is 80 degrees for a perfect fit to the OE MINI intake hose system. It comes complete with two proper sized...

This elbow designed to be used with M7 Speed's MAXX-FLO Intake System. It measures 3" on the housing end and 2.75" at the MAF sensor end. The bend is 80 degrees for a perfect fit to the OE MINI intake hose system. It comes complete with two proper sized...

Now available for the INTERNATIONAL Market is M7 Speed's newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N14 turbocharged engine with a MAF sensor delete. Offered four standard M7 colors (BLACK, RED,...

FEED YOUR N18 MINI MORE AIR | MAKE MORE POWER Improve the MINI's breathing capacity by replacing all the restricted intake hose with larger and smoother high flowing parts. We have bundled together in one kit the M7 Speed Intake Hose, Hot Side Turbo...

N18 Intake Hose PCV Heater Replicator Kit.

Turbosmart has developed a unique Turbosmart Billet Blanking Plate specifically designed for the Borg-Warner EFR, KKK and Mini R56 Turbos. This billet blanking plate eliminates the need for an additional diverter valve when fitting an external BOV to...

The award-winning Kompact EM series Blow-Off Valves, are the world's first truly plug and play Blow-Off Valves. Simply unplug and unbolt your OEM Blow-Off Valve, and install ours in its place. No adapters, hoses or extra assembly required. All this while...