Engine Components

Now available is M7 Speed's newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. Offered four standard M7 colors (BLACK, RED, BLUE and GREEN). This is a direct bolt-on OE replacement...

The M7 Pre-Intercooler Charge Pipe is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by...

FEED YOUR MACHINE MORE AIR | MAKE MORE POWER This kit combines the M7 Speed COLD SIDE Intercooler Elbow Kit with its very popular HOT SIDE Charge pipe in the color GREEN. Together this intercooler pipe kit provides the highest flow and lowest...

Application: All N14 and N18 MINI Prince engines with standard length connecting rods. Includes piston rings to mach. Available in standard or 0.5mm oversize bore.  9.5 or 10.5 compression ratio. CP Carrillo is a leading manufacturer of forged...

The M7 Speed 100% fiber reinforced 4-ply silicone Intercooler connector boots work great with OE or aftermarket intercoolers. These connectors are longer and a bit thicker than other aftermarket connector boots to ensure a better seal between the...

Direct Replacement All modified Gen 2 turbo engines that are putting out anything above factory rated power suffer from a very marginal and weak ignition system.  The coils will not support an increase in power and typically start to lose...

Looking for more pep and better fuel economy.  Install a set of NGK Laser Iridium Fine Wire High Ignitability spark plugs and gain back some of the lost new car performance.  A cleaner and hotter spark burns the fuel more efficiently resuting...

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock you are ensured a stronger and more consistent spark. Whether you are...

Choose from 20% or 16% total overdrive options PERFORMANCE POWER PAK FOR GEN 1 INCLUDES: 20% Total Overdrive for Optium Performance M7 Speed 16% Overdrive supercharger pulley M7 Speed 4% Lightweight Overdrive crank pulley  16% Total Overdrive...

Now available is M7 Speed's newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. Offered four standard M7 colors (BLACK, RED, BLUE and GREEN). This is a direct bolt-on OE replacement...

Set of 4 coils.  Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output then stock you are ensured a stronger and more consistent...

100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the later model N18 turbocharged Prince engine. Offered in the four standard M7 colors (BLACK, RED, BLUE and GREEN).  The M7 High Flow Intake Hose kit is the only one on...

FEED YOUR Countryman & Paceman MINI MORE AIR | MAKE MORE POWER Improve the MINI's breathing capacity by replacing all the restricted intake hose with larger and smoother high flowing parts. We have bundled together in one kit the M7 Speed Intake...

Availabe in Four Colors: BLACK | RED | BLUE | GREEN The Cold Side Lower Intercooler Elbow is made for all Generation 2 MINI Coopers (R55 through R61) with a 1.6 liter turbocharged engine (N14 or N18). This OE replacement elbow is made from the same high...

Easily Bolt-On HP and Torque The M7 Pre-Intercooler Charge Pipe is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory...