{"title":"Engine Components","description":"","products":[{"product_id":"m7-stage-i-ignition-pak-standard-heat-range-plugs-53-3m7750","title":"M7 Stage I Ignition Pak | Standard Heat Range Plugs | 53-3M7750","description":"\u003cp\u003eWith well over a decade of experience, the tuning experts at M7 have carefully hand picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.\u003c\/p\u003e\n\u003cp\u003eOur Stage I Ignition Pak includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne High performance MSD Blaster Coil (36,000 volts)\u003c\/li\u003e\n\u003cli\u003eOne set of MSD 8.5 mm high performance spark plug wires\u003c\/li\u003e\n\u003cli\u003eOne set of four NGK Iridium Spark Plugs (Standard Heat Range) .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e SAVE $$$ WHEN BUYING IN BUNDLED KIT! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM7 prides itself on using only the finest materials to produce their products. We carefully select our partners that meet our same strict standards. You can count on every part in our kits to be of the best quality and design, regardless of price.As a bonus, each kit is priced to save you money when compared to buy the partsindividually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e About the MSD Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurns ratio: 77:1\u003c\/li\u003e\n\u003cli\u003ePrimary resistance: .51 OHMs\u003c\/li\u003e\n\u003cli\u003eSecondary resistance: 12K OHMs\u003c\/li\u003e\n\u003cli\u003eInductance: 7 mH\u003c\/li\u003e\n\u003cli\u003eMaximum voltage: 36,000 Volts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect performance replacement for all 2001-2006 R50, R52, R52S and R53 MINI Coopers\u003c\/li\u003e\n\u003cli\u003e77:1 turns ratio and lower primary resistance produce high voltage output\u003c\/li\u003e\n\u003cli\u003eWorks with stock ignition as well as MSD Ignitions\u003c\/li\u003e\n\u003cli\u003eFlat terminal connection only\u003c\/li\u003e\n\u003cli\u003e50 State Legal Direct Replacement part\u003c\/li\u003e\n\u003cli\u003eC.A.R.B.\u003cspan\u003e E.O Number D-40-37\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e About the MSD Spark Plug Wires \u003c\/strong\u003eThe MSD 8.5mm Super Conductor Wire is \"the\" performance wire.Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) \"choke\". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement part. No C.A.R.B. approval is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e About the NGK Iridium Spark Plugs \u003c\/strong\u003eDesigned specifically for the performance enthusiast. Iridium IXï¿_ offers extreme ignitability, improved throttle response and superior anti fouling- Fine Iridium tip ensures high durability and a consistently stable spark- Iridium alloy has extremely high melting point, perfect for todayï¿_Ûªs high-tech, high-performance engines- Trivalent Metal Plating - superior anti-corrosion and anti-seizing properties- Outstanding acceleration, high fuel efficiency and durability- Ultimate design, technology and performance.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement part. No C.A.R.B. approval is required.\u003c\/p\u003e","brand":"MSD + NGK","offers":[{"title":"Default Title","offer_id":50442737221878,"sku":"53-3M7750","price":323.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7750_1__68966.1733771027.1280.1280.jpg?v=1776218270"},{"product_id":"m7-stage-i-ignition-pak-1-heat-range-colder-53-3m7751","title":"M7 Stage I Ignition Pak | +1 Heat Range Colder | 53-3M7751","description":"\u003cp\u003eWith well over a decade of experience, the tuning experts at M7 have carefully hand picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.\u003c\/p\u003e\n\u003cp\u003eOur Stage I Ignition Pak includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne high performance MSD Blaster Coil (36,000 volts).\u003c\/li\u003e\n\u003cli\u003eOne set of MSD 8.5 mm high performance spark plug wires\u003c\/li\u003e\n\u003cli\u003eOne set of four NGK Iridium Spark Plugs (\u003cstrong\u003e+1 Colder heat range\u003c\/strong\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e SAVE $$$ OVER BUYING THE PARTS INDIVIDUALLY! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM7 prides itself on using only the finest materials to produce their products. We carefully select our partners that meet our same strict standards. You can count on every part in our kits to be of the best quality and design, regardless of price.As a bonus, each kit is priced to save you money when compared to buy the partsindividually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e About the MSD Coil \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurns ratio: 77:1\u003c\/li\u003e\n\u003cli\u003ePrimary resistance: .51 OHMs\u003c\/li\u003e\n\u003cli\u003eSecondary resistance: 12K OHMs\u003c\/li\u003e\n\u003cli\u003eInductance: 7 mH\u003c\/li\u003e\n\u003cli\u003eMaximum voltage: 36,000 Volts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect performance replacement for 2001-2006 R50-R52-R52s(upto 2008) and R53 MINI Coopers\u003c\/li\u003e\n\u003cli\u003e77:1 turns ratio and lower primary resistance produce high voltage output\u003c\/li\u003e\n\u003cli\u003eWorks with stock ignition as well as MSD Ignitions\u003c\/li\u003e\n\u003cli\u003eFlat terminal connection.\u003c\/li\u003e\n\u003cli\u003e50 State Legal Direct Replacement part\u003c\/li\u003e\n\u003cli\u003eC.A.R.B. E.O Number D-40-37\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e About the MSD Spark Plug Wires \u003c\/strong\u003eThe MSD 8.5mm Super Conductor Wire is \"the\" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) \"choke\". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 State Legal Direct Replacement part\u003c\/li\u003e\n\u003cli\u003eNo C.A.R.B. E.O Number is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e About the NGK Iridium Spark Plugs \u003c\/strong\u003eDesigned specifically for the performance enthusiast. Iridium offers extreme ignitability, improved throttle response and superior anti fouling- Fine Iridium tip ensures high durability and a consistently stable spark- Iridium alloy has extremely high melting point, perfect for todayï¿_Ûªs high-tech, high-performance engines- Trivalent Metal Plating - superior anti-corrosion and anti-seizing properties- Outstanding acceleration, high fuel efficiency and durability- Ultimate design, technology and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes one set of four + 1 cooler heat range spark plugs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MSD + NGK","offers":[{"title":"Default Title","offer_id":50442738893046,"sku":"53-3M7751","price":323.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7751_1__02964.1733771029.1280.1280.jpg?v=1776218362"},{"product_id":"m7-stage-i-ignition-pak-2-colder-spark-plugs-53-3m7752","title":"M7 Stage I Ignition Pak | +2 Colder Spark Plugs | 53-3M7752","description":"\u003cp\u003eWith well over a decade of experience, the tuning experts at M7 have carefully hand picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.\u003c\/p\u003e\n\u003cp\u003eOur Stage I Ignition Pak includes a high performance MSD Blaster Coil (36,000 volts), MSD 8.5 mm high performance spark plug wires and a set of four of high performance NGK Iridium Spark Plugs +2 Heat Rand Colder.  These are recommended for highly modified engines (250 HP+) used for sever duty track events only. \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e+2 Colder plugs ARE NOT RECOMMENDED FOR EVERYDAY STREET DRIVING.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAVE $$$ OVER BUYING THE PARTS INDIVIDUALLY!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM7 prides itself on using only the finest materials to produce their products. We carefully select our partners that meet our same strict standards. You can count on every part in our kits to be of the best quality and design, regardless of price.As a bonus, each kit is priced to save you money when compared to buy the partsindividually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the MSD Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurns ratio: 77:1\u003c\/li\u003e\n\u003cli\u003ePrimary resistance: .51 OHMs\u003c\/li\u003e\n\u003cli\u003eSecondary resistance: 12K OHMs\u003c\/li\u003e\n\u003cli\u003eInductance: 7 mH\u003c\/li\u003e\n\u003cli\u003eMaximum voltage: 36,000 Volts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect performance replacement for 2001-2006 R50-R52-R52s(upto 2008) and R53 MINI Coopers\u003c\/li\u003e\n\u003cli\u003e77:1 turns ratio and lower primary resistance produce high voltage output\u003c\/li\u003e\n\u003cli\u003eWorks with stock ignition as well as MSD Ignitions\u003c\/li\u003e\n\u003cli\u003eFlat terminal connection.\u003c\/li\u003e\n\u003cli\u003e50 State Legal Direct Replacement part\u003c\/li\u003e\n\u003cli\u003eC.A.R.B. E.O Number D-40-37\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the MSD Spark Plug Wires \u003c\/strong\u003eThe MSD 8.5mm Super Conductor Wire is \"the\" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) \"choke\". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 State Legal Direct Replacement part\u003c\/li\u003e\n\u003cli\u003eNo C.A.R.B. E.O Number is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e About the NGK Iridium Spark Plugs \u003c\/strong\u003eDesigned specifically for the performance enthusiast. Iridium IXï¿_ offers extreme ignitability, improved throttle response and superior anti fouling- Fine Iridium tip ensures high durability and a consistently stable spark- Iridium alloy has extremely high melting point, perfect for todayï¿_Ûªs high-tech, high-performance engines- Trivalent Metal Plating - superior anti-corrosion and anti-seizing properties- Outstanding acceleration, high fuel efficiency and durability- Ultimate design, technology and performance.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cem\u003e\u003cstrong\u003e+2 Colder plugs ARE NOT RECOMMENDED FOR EVERYDAY STREET DRIVING.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"MSD + NGK","offers":[{"title":"Default Title","offer_id":50442739482870,"sku":"53-3M7752","price":323.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7752_1__94053.1733771031.1280.1280.jpg?v=1776218420"},{"product_id":"m7-speed-stage-i-ignition-kit-gen-1-2002-2006-all","title":"M7 Speed Stage I Ignition Kit | Gen 1 2002-2006 (All)","description":"\u003cp\u003eWith well over a decade of experience, the tuning experts at M7 have carefully hand picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.\u003c\/p\u003e\n\u003cp\u003eOur Stage I Ignition Pak includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne High performance MSD Blaster Coil (36,000 volts)\u003c\/li\u003e\n\u003cli\u003eOne set of MSD 8.5 mm high performance spark plug wires\u003c\/li\u003e\n\u003cli\u003eOne set of four NGK Iridium Spark Plugs (Standard or +1 Heat Range options) .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSAVE $$$ WHEN BUYING IN BUNDLED KIT!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM7 prides itself on using only the finest materials to produce their products. We carefully select our partners that meet our same strict standards. You can count on every part in our kits to be of the best quality and design, regardless of price.As a bonus, each kit is priced to save you money when compared to buy the partsindividually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the MSD Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurns ratio: 77:1\u003c\/li\u003e\n\u003cli\u003ePrimary resistance: .51 OHMs\u003c\/li\u003e\n\u003cli\u003eSecondary resistance: 12K OHMs\u003c\/li\u003e\n\u003cli\u003eInductance: 7 mH\u003c\/li\u003e\n\u003cli\u003eMaximum voltage: 36,000 Volts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect performance replacement for all 2001-2006 R50, R52, R52S and R53 MINI Coopers\u003c\/li\u003e\n\u003cli\u003e77:1 turns ratio and lower primary resistance produce high voltage output\u003c\/li\u003e\n\u003cli\u003eWorks with stock ignition as well as MSD Ignitions\u003c\/li\u003e\n\u003cli\u003eFlat terminal connection only\u003c\/li\u003e\n\u003cli\u003e50 State Legal Direct Replacement part\u003c\/li\u003e\n\u003cli\u003eC.A.R.B. E.O Number D-40-37\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the MSD Spark Plug Wires \u003c\/strong\u003eThe MSD 8.5mm Super Conductor Wire is \"the\" performance wire.Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) \"choke\". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.\u003c\/p\u003e\n\u003cp\u003eThis kit is a direct replacement part. Legal in all 50 US states. No C.A.R.B. EO is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the NGK Iridium Spark Plugs \u003c\/strong\u003eDesigned specifically for the performance enthusiast. Iridium IXï¿_ offers extreme ignitability, improved throttle response and superior anti fouling- Fine Iridium tip ensures high durability and a consistently stable spark- Iridium alloy has extremely high melting point, perfect for todayï¿_Ûªs high-tech, high-performance engines- Trivalent Metal Plating - superior anti-corrosion and anti-seizing properties- Outstanding acceleration, high fuel efficiency and durability- Ultimate design, technology and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelect desired heat range when ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eStandard Heat Range:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eBest choice for daily driver with minor engine modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e+1 Colder Heat Range:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRecommended for agressve driving and cars with engine mods such as 16% \u0026amp; 4% supercharger pulleys, Bytetronic ECU Tunes, cat-less free flow exhaust system with header and high RPM operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003e+2 Colder Heat range:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eRecommended for all out performance engine mods (+250 HP) and sustained high RPM track driving\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MSD + NGK","offers":[{"title":"Default Title","offer_id":50730009395446,"sku":"53-3M7775-ST","price":350.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7775_1__05025.1733771025.1280.1280.jpg?v=1776218476"},{"product_id":"shop-all-m7-silicone-intercooler-boots-53-3m7406-7-8","title":"M7 Silicone Intercooler Boots - 4 Colors to Choose From","description":"\u003cp\u003eThe M7 Speed 100% fiber reinforced 4-ply silicone Intercooler connector boots work great with OE or aftermarket intercoolers. These connectors are longer and a bit thicker than other aftermarket connector boots to ensure a better seal between the intercooler core and the inlet\/ outlet horns. The added thickness gives extra strength to prevent failure during high boost operation. The M7 Intercooler Boots feature a tighter fit around the intercooler as well as the OEM intercooler horns. These are a must have for modified and high boost engine builds. Or simply replace your old, heat damaged and power robbing leaky intercooler boots with a set of brand new set of M7 Speed 100% silicone boots at a fraction of the cost od OE replacements.  Available in Black Red, Green or Blue for a little added under hood WOW ! Easy to install. No special tools or skills needed. Four colors to choose from.  BLACK-RED-BLUE-GREEN\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50723566715126,"sku":"53-3M740","price":38.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7408_2__32450.1734359685.1280.1280.jpg?v=1776218593"},{"product_id":"msd-blaster-coil-35-000-volts","title":"MSD Blaster Coil - 35,000 VOLTS!","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis direct bolt-on replacement coil from MSD intensifies the spark output of your ignition. At 35,000 volts, the MSD coil adds the extra spark energy needed to fire high cylinder pressure mixtures developed by today's modified and supercharged engines. More energy is needed to create ignition and these MSD wires deliver that extra energy in the most efficient way possible. Even with unmodified engines, the addition of the MSD ignition coil will result in a smoother idle, improved mid-range power and improved MPG. Installation is a snap -- the coil connects directly to your factory wiring and bolts into the factory location. The red case adds extra bling to your engine. Remember to add the red MSD 8.5mm wires for a cool look and total performance upgrade for your 1st generation MINI.\u003c\/span\u003e\u003c\/p\u003e","brand":"MSD","offers":[{"title":"Default Title","offer_id":50442740203766,"sku":"53-3MSD7751","price":133.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3MSD7751_1__82815.1733771028.1280.1280.jpg?v=1776218636"},{"product_id":"engine-components-msd-super-conductor-ignition-wire-set-red-silicone-jacket-53-3msd7752","title":"MSD Super Conductor Ignition Wire Set - Red Silicone Jacket - 53-3MSD7752","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThe MSD Super Conductor wire set is designed specifically for the rigors of MINI Cooper track events and street performance. At higher cylinder pressure developed by modified and supercharged engines, more energy is needed to create ignition, and these MSD wires deliver that extra energy in the most efficient way possible. MSD's 8.5mm Super Conductor wires have a special, helically wound core that offers just 40-50 ohms of resistance per foot--but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8.5mm synthetic red silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, stainless steel terminals feature snap locks to ensure a secure fit. Easy to install.\u003c\/span\u003e\u003c\/p\u003e","brand":"MSD","offers":[{"title":"Default Title","offer_id":50442740433142,"sku":"53-3MSD7752","price":133.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3MSD7752_1__99594.1733771030.1280.1280.jpg?v=1776218694"},{"product_id":"engine-components-bosch-550cc-injectors-for-all-gen-1-mini-coopers","title":"Bosch 550cc Injectors | For all Gen 1 MINI Coopers","description":"\u003cp\u003eThese authentic Bosch 550cc high-impedance injectors flow 52 lbs\/hr (550cc\/min) at 43.5 PSI (3 BAR) and more at higher PSI. They are designed for high-performance applications and are not suggested for your MINI unless you plan to have the ECU tuned. Kit includes four brand new Bosch 550cc injectors and four custom electrical adapters to convert the Bosch fuel injector to the factory MINI loom (Siemens Fuel Injector. Will support up to 290 HP at 90% duty cycle.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese Bosch 550CC units have been proven to be the answer for the higher output 1.6L generation 1 MINIs. 44% more fuel flow than standard JCW 380cc injectors \u0026amp; 67% more fuel flow than standard \"S\" injectors. Will support up to 290 HP at 90% duty cycle.\u003c\/p\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":50442740465910,"sku":"53-390550","price":381.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-390550_1__72762.1733771030.1280.1280.jpg?v=1776218710"},{"product_id":"shop-all-m7-silicone-intercooler-boots-red-53-3m7407","title":"M7 Silicone Intercooler Boots (Red) - 53-3M7407","description":"\u003cp\u003eThe M7 Speed 100% fiber reinforced 4-ply silicone Intercooler connector boots work great with OE or aftermarket intercoolers. These connectors are longer and a bit thicker than other aftermarket connector boots to ensure a better seal between the intercooler core and the inlet\/ outlet horns. The added thickness gives extra strength to prevent failure during high boost operation. The M7 Intercooler Boots feature a tighter fit around the intercooler as well as the OEM intercooler horns. These are a must have for modified and high boost engine builds. Or simply replace your old, heat damaged and power robbing leaky intercooler boots with a set of brand new set of M7 Speed 100% silicone boots at a fraction of the cost od OE replacements. Available in Black Red, Green or Blue for a little added under hood WOW ! Easy to install. No special tools or skills needed.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442740531446,"sku":"53-3M7407","price":38.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7407__91898.1737640263.1280.1280.jpg?v=1776218748"},{"product_id":"shop-all-ngk-iridium-ix-spark-plugs-set-of-4-standard-heat-range-gen-1-mini-cooper","title":"NGK Iridium IX Spark Plugs (Set of 4) | Standard Heat Range | Gen 1 MINI Cooper","description":"\u003cp\u003eDesigned specifically for the performance enthusiast. Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling. NGK Iridium Spark Plugs have proven to be the best choice for performance minded MINI Cooper owners. Fits Gen 1 MINI Coopers (2002-2006 R53S \u0026amp; 2005-2008 R52S)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Heat Range\u003c\/li\u003e\n\u003cli\u003eSold in a set of 4\u003c\/li\u003e\n\u003cli\u003eFits Gen 1 MINI Coopers (2002-2006 R53S \u0026amp; 2005-2008 R52S)\u003c\/li\u003e\n\u003cli\u003eFine Iridium tip ensures high durability and a consistently stable spark\u003c\/li\u003e\n\u003cli\u003eIridium alloy has extremely high melting point, perfect for today's high-tech, high-performance engines\u003c\/li\u003e\n\u003cli\u003eTrivalent Metal Plating - superior anti-corrosion and anti-seizing properties\u003c\/li\u003e\n\u003cli\u003eOutstanding acceleration, high fuel efficiency and durability\u003c\/li\u003e\n\u003cli\u003eUltimate design, technology and performance.\u003c\/li\u003e\n\u003cli\u003e0.6mm laser welded iridium tip\u003c\/li\u003e\n\u003cli\u003eIridium alloy is extremely durable against heat, corrosion, and electrical wear\u003c\/li\u003e\n\u003cli\u003eTapered ground electrode to minimize \"quenching effect\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":50442740728054,"sku":"53-3NGK7770","price":73.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3NGK7770_1__19847.1733771025.1280.1280.jpg?v=1776218780"},{"product_id":"m7-silicone-intercooler-boots-black-53-3m7408","title":"M7 Silicone Intercooler Boots (Black) - 53-3M7408","description":"\u003cp\u003eThe M7 Speed 100% fiber reinforced 4-ply silicone Intercooler connector boots work great with OE or aftermarket intercoolers. These connectors are longer and a bit thicker than other aftermarket connector boots to ensure a better seal between the intercooler core and the inlet\/ outlet horns. The added thickness gives extra strength to prevent failure during high boost operation. The M7 Intercooler Boots feature a tighter fit around the intercooler as well as the OEM intercooler horns. These are a must have for modified and high boost engine builds. Or simply replace your old, heat damaged and power robbing leaky intercooler boots with a set of brand new set of M7 Speed 100% silicone boots at a fraction of the cost od OE replacements. Available in Black Red, Green or Blue for a little added under hood WOW ! Easy to install. No special tools or skills needed.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442742006006,"sku":"53-3M7408","price":38.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7408__84895.1738260046.1280.1280.jpg?v=1776218871"},{"product_id":"engine-components-ngk-iridium-ix-spark-plugs-set-of-4-1-colder-heat-range-gen-1-mini-cooper","title":"NGK Iridium IX Spark Plugs (Set of 4) | +1 Colder Heat Range | Gen 1 MINI Cooper","description":"\u003cp\u003eDesigned specifically for the performance enthusiast. Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling. NGK Iridium Spark Plugs have proven to be the best choice for performance minded MINI Cooper owners. These spark plugs fit Gen 1 MINI Coopers\u0026amp;nbsp;(2002-2006 R53S \u0026amp; 2005-2008 R52S)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in a set of 4\u003c\/li\u003e\n\u003cli\u003e+1 heat range colder (Recommended for extended high RPM use applications on modified engines)\u003c\/li\u003e\n\u003cli\u003eFits Gen 1 MINI Coopers\u0026amp;nbsp;(2002-2006 R53S \u0026amp; 2005-2008 R52S)\u003c\/li\u003e\n\u003cli\u003eFine Iridium tip ensures high durability and a consistently stable spark\u003c\/li\u003e\n\u003cli\u003eIridium alloy has extremely high melting point, perfect for today's high-tech, high-performance engines\u003c\/li\u003e\n\u003cli\u003eTrivalent Metal Plating - superior anti-corrosion and anti-seizing properties\u003c\/li\u003e\n\u003cli\u003eOutstanding acceleration, high fuel efficiency and durability\u003c\/li\u003e\n\u003cli\u003eUltimate design, technology and performance.\u003c\/li\u003e\n\u003cli\u003e0.6mm laser welded iridium tip\u003c\/li\u003e\n\u003cli\u003eIridium alloy is extremely durable against heat, corrosion, and electrical wear\u003c\/li\u003e\n\u003cli\u003eTapered ground electrode to minimize \"quenching effect\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":50442742071542,"sku":"53-3NGK7771","price":73.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3NGK7771_1__38560.1733771030.1280.1280.jpg?v=1776218886"},{"product_id":"engine-components-ngk-iridium-ix-spark-plugs-set-of-4-2-colder-heat-range-gen-1-mini-cooper","title":"NGK Iridium IX Spark Plugs (Set of 4) | +2 Colder Heat Range | Gen 1 | MINI Cooper","description":"\u003cp\u003e+2 Heat range colder than stock. Recommended for extended high RPM racing applications on highly modified engines. Designed specifically for the performance enthusiast. Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling. NGK Iridium Spark Plugs have proven to be the best choice for performance minded MINI Cooper owners. These spark plugs fit\u003cspan style=\"font-style: italic;\"\u003e Gen 1 MINI Coopers\u0026amp;nbsp;(2002-2006 R53S \u0026amp; 2005-2008 R52S)\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in a set of 4\u003c\/li\u003e\n\u003cli\u003eFits Gen 1 MINI Coopers\u0026amp;nbsp;(2002-2006 R53S \u0026amp; 2005-2008 R52S)\u003c\/li\u003e\n\u003cli\u003e+2 Heat range colder than stock. Recommended for extended high RPM racing applications on highly modified engines.\u003c\/li\u003e\n\u003cli\u003eFine Iridium tip ensures high durability and a consistently stable spark\u003c\/li\u003e\n\u003cli\u003eIridium alloy has extremely high melting point, perfect for today's high-tech, high-performance engines\u003c\/li\u003e\n\u003cli\u003eTrivalent Metal Plating - superior anti-corrosion and anti-seizing properties\u003c\/li\u003e\n\u003cli\u003eOutstanding acceleration, high fuel efficiency and durability\u003c\/li\u003e\n\u003cli\u003eUltimate design, technology and performance.\u003c\/li\u003e\n\u003cli\u003e0.6mm laser welded iridium tip\u003c\/li\u003e\n\u003cli\u003eIridium alloy is extremely durable against heat, corrosion, and electrical wear\u003c\/li\u003e\n\u003cli\u003eTapered ground electrode to minimize \"quenching effect\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect desired heat range when ordering.\u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":50442743316726,"sku":"53-3NGK7772","price":73.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3NGK7772_1__53549.1733771032.1280.1280.jpg?v=1776218976"},{"product_id":"engine-components-gen-1-power-up-kit-supercharger-overdrive-pulley-kit-53-3m7700","title":"Gen 1 Power Up Kit | Supercharger Overdrive Pulley Kit | 53-3M7700","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: medium;\"\u003e\u003cstrong\u003ePower Up Supercharger Overdrive Kit I\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline; font-size: medium;\"\u003e\u003cstrong\u003encludes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: medium;\"\u003e\u003cstrong\u003eChoose from 20% or 16% total overdrive options\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: small;\"\u003e20% Total Overdrive for Optium Performance\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eM7 Speed 16% Overdrive supercharger pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eM7 Speed 4% Lightweight Overdrive crank pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: small;\"\u003e 16% Total Overdrive for increased performance with additional reliability.\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eM7 Speed 16% Overdrive supercharger pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: small;\"\u003eM7 Speed 0% Lightweight Overdrive crank pulley\u003c\/span\u003e\u003cspan style=\"font-size: small;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eProper length Micro-V Drive belt for this pulley combination\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: small;\"\u003eOptional:  \u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eAdd NGK Spark Plugs (three heat choices available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eMSD Ignition Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eAdd Dayco Belt Tensioner for reduced supercharger belt slip and peak performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith well over a decade of experience, the tuning experts at M7 have carefully hand-picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.\u003c\/p\u003e\n\u003cp\u003eM7 prides itself on using only the finest materials to produce their products. We carefully select our partners that meet our same strict standards. You can count on every part in our kits to be of the best quality and design, regardless of price.As a bonus, each kit is priced to save you money when compared to buy the parts individually.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAbout our 16% Pulley \u003c\/strong\u003eWhen M7 was looking to add a pulley to our existing product offering, we realized that it had to be better and have that M7 \"out-of-the-box\" engineering and mindset. The M7 Supercharger Technology Pulley features a 16% reduction and a number of improvements over stock and other aftermarket pulley designs.Our revised design for 2014 allows the pulley to be easily positioned deeper onto the supercharger shaft for proper belt alignment. We added shoulders to the outside of the pulley to help prevent the belt from walking off of the pulley surface if you have a weak tensioner or the belt stretches at extreme RPM events. Our proprietary taper-loc shaft locking system offers the highest locking force to the supercharger shaft at the lightest weight. The M7 taper-loc is superior to any other design on the market....PERIOD! This high grip taper-lock system offers both ease of installation and slip free supercharger performance. By design, the assembly is 100% balanced out of the box. The drive belt grooves are machine to exacting SAE-J1459 specifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe M7 SC Overdrive Pulley also incorporates an active cooling system that pulls in cool air through the holes in the pulley shoulder, keeping belt temperature down. Made from high quality aircraft grade billet steel and gold zinc plated for corrosion resistance and years of trouble-free performance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAbout our 0% and 4% Crank Pulley \u003c\/strong\u003e This beautiful design is a result of extensive computer modeling and CNC machining. A hard anodized coating was added to protect your investment from the elements and ensure a lifetime worth of use. The V-Belt grooves are machined to exacting SAE-J1459 specifications for minimum belt slippage at maximum boost. At 0.99 lbs, the lightweight M7 4% Crank Pulley assists in reducing rotational mass, which in turn increases horsepower, torque and throttle response. Use this in combination with the M7 16% Supercharger Technology Pulley for maximum performance and boost yourself to the next level of MINI tuning and performance. Now comes with a brand new high quality ARP bolt and hardened washer for an extra level of assurance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNGK Spark Plugs: \u003c\/strong\u003e\u003cstrong\u003eSelect desired heat range when ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eStandard Heat Range:\u003c\/strong\u003e\u003c\/span\u003e Best choice for daily driver with minor engine modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e+1 Colder Heat Range:\u003c\/span\u003e \u003c\/strong\u003eRecommended for agressve driving and cars with engine mods such as 16% \u0026amp; 4% supercharger pulleys, Bytetronic ECU Tunes, cat-less free flow exhaust system with header and high RPM operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003e+2 Colder Heat range:\u003c\/strong\u003e\u003c\/span\u003e Recommended for all out performance engine mods (+250 HP) and sustained high RPM track driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdd a new high quality Dayco Products belt tensioner assembly for improved \u0026amp; reliable performance.  See what an old tensioner can do to your power  \u003cstrong\u003e\u003ca href=\"https:\/\/www.m7tuning.com\/media\/wysiwyg\/Gen_1_Belt_tensioner_old_vs_New.JPG\" rel=\"noopener\" target=\"_blank\" title=\"Old vs New Tensioner\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442743677174,"sku":null,"price":368.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7700_1__07226.1734359680.1280.1280.jpg?v=1776219087"},{"product_id":"engine-components-gen-1-mini-power-pak-r53-53-3m7701","title":"GEN 1 MINI Power Pak (R53) 53-3M7701","description":"\u003cp\u003e\u003cspan style=\"font-size: medium; color: #ff0000;\"\u003e\u003cstrong\u003eGEN 1 Power Pak\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"font-size: small; color: #000000;\"\u003e\u003cstrong\u003eGEN 1 Power Pak Includes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong style=\"color: #000000; font-size: small;\"\u003eM7 Speed 16% Overdrive Supercharge Pulley\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNGK Iridium Spark Plugs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNew Micro-V Supercharger Drive Belt\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003eOptional: MSD Coil\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003eOptional: MSD Plug Wires \u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003eOptional: Belt Tensioner Assembly\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSAVE $$$ OVER BUYING THE PARTS INDIVIDUALLY!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM7 prides itself on using only the highest grade materials and hardware to produce our products. You can count on every part in our kits to be of the best quality and design, regardless of price. As a bonus, each kit is priced to save you money when compared to buying the parts individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e About our 16% Pulley: \u003c\/strong\u003eThe M7 Supercharger Overdrive Pulley features a 16% reduction and a number of improvements over stock and other aftermarket pulley designs.\u003c\/p\u003e\n\u003cp\u003eShoulders have been added to the outside of the pulley to help prevent the belt from walking off of the pulley surface if you have a weak tensioner or the belt stretches at extreme RPM events. The Taper-loc shaft locking system offers the highest locking force to the supercharger shaft at the lightest weight. The M7 Speed Taper-loc is superior to any other design on the market...PERIOD! This high grip taper-lock system offers both ease of installation and slip free supercharger performance, and by design the assembly is 100% balanced out of the box. The drive belt grooves are machine to exacting SAE J1459 specifications. The M7 Speed Supercharger Overdrive Pulley also incorporates an active cooling system that pulls in cool air through the holes in the pulley shoulder. This helps keep belt temperature down.\u003cbr\u003e\u003cbr\u003eMade from high quality aircraft grade aluminum and gold anodized for corrosion resistance and years of trouble-free performance. The overall result: better belt grip and less slipage equals more POWER!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Micro-V Supercharger Drive Belt: \u003c\/strong\u003eEvery Stage 1 kit include a brand new brand name drive belt (Gates or dayco) of the correct length for your pulley combination.  Select the pulley combination below when ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNGK Spark Plugs: \u003c\/strong\u003e\u003cstrong\u003eSelect desired heat range when ordering. Save an additional $10\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Heat Range:\u003c\/strong\u003e Best choice for daily driver with minor engine modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e+1 Colder Heat Range: \u003c\/strong\u003eRecommended for agressve driving and cars with engine mods such as 16% \u0026amp; 4% supercharger pulleys, Bytetronic ECU Tunes, cat-less free flow exhaust system with header and high RPM operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e+2 Colder Heat range:\u003c\/strong\u003e Recommended for all out performance engine mods (+250 HP) and sustained high RPM track driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442747412726,"sku":"53-3M7701","price":269.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3m7701-2_no-text__63892.1734359683.1280.1280.jpg?v=1776219150"},{"product_id":"shop-all-gen-1-mini-cooper-performance-power-pak-r53-53-3m7702","title":"GEN 1 MINI Cooper Performance Power Pak (R53) | 53-3M7702","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: medium;\"\u003e\u003cstrong\u003eChoose from 20% or 16% total overdrive options\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePERFORMANCE POWER PAK FOR GEN 1 INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003e20% Total Overdrive for Optium Performance\u003c\/strong\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eM7 Speed 16% Overdrive supercharger pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eM7 Speed 4% Lightweight Overdrive crank pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003e 16% Total Overdrive for increased performance with reliability.\u003c\/strong\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eM7 Speed 16% Overdrive supercharger pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eM7 Speed 0% Lightweight Overdrive crank pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eProper length Micro-V Drive belt for this pulley combination\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eNGK Iridium Spark Plugs (Set of 4) - \u003c\/strong\u003eStandard, +1 Colder, +2 Colder available\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eM7 Speed 100% Silicone Intercooler Boots \u003c\/strong\u003e(Red, Blue, Black or Green)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e  \u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eMSD Ignition Coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eMSD Spark Plug Wires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eAdd Dayco Belt Tensioner for reduced supercharger belt slip and peak performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eWith well over a decade of experience, the tuning experts at M7 have carefully hand-picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eOur Performance Power Pak includes our exclusive 16% Supercharger pulley or 4% Crank pulley, a proper length Micro V Drive Belt and the proper NGK Iridium Spark Plugs along with a set of 100% silicone intercooler boots (available in four colors).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eM7 prides itself on using only the finest materials to produce their products. We carefully select our partners that meet our same strict standards. You can count on every part in our kits to be of the best quality and design, regardless of price.As a bonus, each kit is priced to save you money when compared to buy the parts individually.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eAbout our 16% Pulley \u003c\/strong\u003eWhen M7 was looking to add a pulley to our existing product offering, we realized that it had to be better and have that M7 \"out-of-the-box\" engineering and mindset. The M7 Supercharger Technology Pulley features a 16% reduction and a number of improvements over stock and other aftermarket pulley designs.Our revised design for 2014 allows the pulley to be easily positioned deeper onto the supercharger shaft for proper belt alignment. We added shoulders to the outside of the pulley to help prevent the belt from walking off of the pulley surface if you have a weak tensioner or the belt stretches at extreme RPM events. Our proprietary taper-loc shaft locking system offers the highest locking force to the supercharger shaft at the lightest weight. The M7 taper-loc is superior to any other design on the market....PERIOD! This high grip taper-lock system offers both ease of installation and slip free supercharger performance. By design, the assembly is 100% balanced out of the box. The drive belt grooves are machine to exacting SAE-J1459 specifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThe M7 Overdrive Pulley also incorporates an active cooling system that pulls in cool air through the holes in the pulley shoulder, keeping belt temperature down. Made from high quality aircraft grade materials and plated for life long corrosion resistance and years of trouble-free performance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eAbout our Lightweight 0% and 4% Crank Pulley \u003c\/strong\u003e This beautiful design is a result of extensive computer modeling and CNC machining. A hard anodized coating was added to protect your investment from the elements and ensure a lifetime worth of use. The V-Belt grooves are machined to exacting SAE-J1459 specifications for minimum belt slippage at maximum boost. At 12 ounces, the lightweight M7 Crank Pulley assists in reducing rotational mass, which in turn increases horsepower, torque and throttle response. Use this in combination with the M7 16% Supercharger Technology Pulley for maximum performance and boost yourself to the next level of MINI tuning and performance. Now comes with a brand new high quality ARP bolt and hardened washer for an extra level of assurance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #333333; font-size: small;\"\u003e\u003cstrong\u003eAbout our Intercooler Boots:\u003c\/strong\u003eThe M7 Speed 100% fiber reinforced 4-ply silicone Intercooler connector boots work great with OE or aftermarket intercoolers. These connectors are longer and a bit thicker than other aftermarket connector boots to ensure a better seal between the intercooler core and the inlet\/ outlet horns. The added thickness gives extra strength to prevent failure during high boost operation. The M7 Intercooler Boots feature a tighter fit around the intercooler as well as the OEM intercooler horns. These are a must have for modified and high boost engine builds. Or simply replace your old, heat damaged and power robbing leaky intercooler boots with a set of brand new set of M7 Speed 100% silicone boots at a fraction of the cost od OE replacements.  Available in Black Red, Green or Blue for a little added under hood WOW ! Easy to install. No special tools or skills needed.\u003c\/span\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442751443190,"sku":"53-3M7702","price":530.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7702_1__30480.1734359687.1280.1280.jpg?v=1776219239"},{"product_id":"engine-components-gen-1-mini-high-performance-power-pak-r53-53-3m7703","title":"GEN 1 MINI High Performance Power Pak (R53) | 53-3M7703","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: medium;\"\u003e\u003cstrong\u003eChoose from 20% or 16% total overdrive options\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHIGH PERFORMANCE POWER PAK FOR GEN 1 INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eM7 Speed Cold Air Intake Kit (C.A.R.B. approved  EO #  D-766)\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003e20% Total Overdrive for Optium Performance\u003c\/strong\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eM7 Speed 16% Overdrive supercharger pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eM7 Speed 4% Lightweight Overdrive crank pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003e 16% Total Overdrive for increased performance with reliability.\u003c\/strong\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eM7 Speed 16% Overdrive supercharger pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eM7 Speed 0% Lightweight Overdrive crank pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eProper length Micro-V Drive belt for this pulley combination\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eNGK Iridium Spark Plugs (Set of 4) - \u003c\/strong\u003eStandard, +1 Colder, +2 Colder available\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eM7 Speed 100% Silicone Intercooler Boots \u003c\/strong\u003e(Red, Blue, Black or Green)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e  \u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eMSD Ignition Coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eMSD Spark Plug Wires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eAdd Dayco Belt Tensioner for reduced supercharger belt slip and peak performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWith well over a decade of experience, the tuning experts at M7 have carefully hand picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSAVE $$$ OVER BUYING THE PARTS INDIVIDUALLY!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eM7 prides itself on using only the finest materials to produce their products. We carefully select our partners that meet our same strict standards. You can count on every part in our kits to be of the best quality and design, regardless of price.As a bonus, each kit is priced to save you money when compared to buy the parts individually.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAbout our 16% Pulley \u003c\/strong\u003eWhen M7 was looking to add a pulley to our existing product offering, we realized that it had to be better and have that M7 \"out-of-the-box\" engineering and mindset. The M7 Supercharger Technology Pulley features a 16% reduction, and a number of improvements over stock and other aftermarket pulley designs.Our revised design for 2014 allows the pulley to be easily positioned deeper onto the supercharger shaft for proper belt alignment. We added shoulders to the outside of the pulley to help prevent the belt from walking off of the pulley surface if you have a weak tensioner or the belt stretches at extreme RPM events. Our proprietary taper-loc shaft locking system offers the highest locking force to the supercharger shaft at the lightest weight. The M7 taper-loc is superior to any other design on the market....PERIOD! This high grip taper-lock system offers both ease of installation and slip free supercharger performance. And by design the assembly is 100% balanced out of the box. The drive belt grooves are machine to exacting SAE-J1459 specifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe M7 Technology Pulley also incorporates an active cooling system that pulls in cool air through the holes in the pulley shoulder. This helps keep belt temperature down. Made from high quality aircraft grade billet steel and gold zinc plated for corrosion resistance and years of trouble free performance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAbout our Lightweight Crank Pulley \u003c\/strong\u003e This beautiful design is a result of extensive computer modeling and CNC machining. A hard anodized coating was added to protect your investment from the elements and ensure a lifetime worth of use. The V-Belt grooves are machined to exacting SAE-J1459 specifications for minimum belt slippage at maximum boost. At 12 ounces, the lightweight M7 Speed Crank Pulley assists in reducing rotational mass, which in turn increases horsepower, torque and throttle response. Use this in combination with the M7 16% Supercharger Technology Pulley for maximum performance and boost yourself to the next level of MINI tuning and performance. Now comes with a brand new high quality ARP bolt and hardened washer for an extra level of assurance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePerformance Belt: \u003c\/strong\u003eWhen using the M7 Crank pulley and 16% Supercharger pulley together, you must use a proper length drive belt or risk slipping or throwing the stock belt. M7 Tuning now offers correct length high performance drive belt that works perfectly with both pulleys!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAbout our Cold Air Intake System (C.A.R.B approved E.O D-766)   \u003c\/strong\u003eThe M7 MINI Cooper S Cold Air Intake works by sealing a dual stage foam filter inside of a fully enclosed custom manufactured metal housing. The steel box closes off any path for engine heat from getting to the filter, and provides the highest resistance to heat transfer when compared to other intakes on the market.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOur dual stage high flow foam filter can be cleaned and re-oiled providing a lifetime of service on your MINI. The over-sized filter gives plenty of filtering capacity without sacrificing airflow on the supercharged Cooper S. The Filter attaches to stock intake piping via a \u003cstrong\u003evelocity stack\u003c\/strong\u003e at the wall of the M7 CAI with a 3\" diameter on the filter side to a 66mm (2.60\") diameter on the engine side. The velocity stack will smooth out the large amount of air entering the intake tract, improving air flow which results in a more efficient intake system. Uses factory inthale hose.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe M7 intake provides the enclosed filter with pressurized, cold air from the cowl area beneath the windshield \u003cem\u003ewithout\u003c\/em\u003e requiring you to cut any of your factory parts. This allows your car to be returned completely to stock if needed. With simple hand tools, the intake can quickly be installed on your car allowing you more time to enjoy the ride! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eINCLUDES\u003cstrong\u003e:\u003c\/strong\u003e Matt black powder coated Cold Air Intake box, installation hardware and a pre-oiled 2 stage foam air filter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout our Intercooler Boots: \u003c\/strong\u003e\u003cspan style=\"color: #333333;\"\u003eThe M7 Speed 100% fiber reinforced 4-ply silicone Intercooler connector boots work great with OE or aftermarket intercoolers. These connectors are longer and a bit thicker than other aftermarket connector boots to ensure a better seal between the intercooler core and the inlet\/ outlet horns. The added thickness gives extra strength to prevent failure during high boost operation. The M7 Intercooler Boots feature a tighter fit around the intercooler as well as the OEM intercooler horns. These are a must have for modified and high boost engine builds. Or simply replace your old, heat damaged and power robbing leaky intercooler boots with a set of brand new set of M7 Speed 100% silicone boots at a fraction of the cost of OE replacements.  Available in Black Red, Green or Blue for a little added under hood WOW ! Easy to install. No special tools or skills needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442755703030,"sku":"53-3M7703","price":785.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7703-3__57058.1734359682.1280.1280.jpg?v=1776219318"},{"product_id":"engine-performance-kits-gen-1-mini-cooper-maxx-performance-power-pak-r53-53-3m7704","title":"GEN 1 MINI Cooper MAXX Performance Power Pak (R53) | 53-3M7704","description":"\u003cp\u003e\u003cspan\u003eWith well over a decade of experience, the tuning experts at M7 have carefully hand picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eOur Gen 1 MAXX Performance Power Pak includes 11 of the Must Haves for Gen 1 MINI Performance: \u003cspan style=\"text-decoration: underline; font-size: medium;\"\u003eChoose from 20% or 16% total overdrive options\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eM7 Speed Cold Air Intake Kit (C.A.R.B. approved  EO  D-766)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003e20% Total Overdrive for Optium Performance\u003c\/strong\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eM7 Speed 16% Overdrive supercharger pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eM7 Speed 4% Lightweight Overdrive crank pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003e 16% Total Overdrive for increased performance with reliability.\u003c\/strong\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eM7 Speed 16% Overdrive supercharger pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eM7 Speed 0% Lightweight Overdrive crank pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eMicro-V drive belt - \u003c\/strong\u003ecorrect length for your pulley selection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eM7 Speed 100% Silicone Intercooler Boots \u003c\/strong\u003e(Red, Blue, Black or Green)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eM7 Speed Exhaust Heat Shield\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eM7 Speed Billet Aluminum Oil Catch Can\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eAluminum Water Tank with 16 PSI Stant Cap\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eMSD 36,000 Volt Ignition Coil\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003e\u003cstrong\u003eNGK 8.5mm Spark Plug Wires\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eNGK Iridium Spark Plugs (Set of 4) - \u003c\/strong\u003eStandard, +1 Colder, +2 Colder available\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSAVE $$$ OVER BUYING THE PARTS INDIVIDUALLY!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eM7 prides itself on using only the finest materials to produce their products. We carefully select our partners that meet our same strict standards. You can count on every part in our kits to be of the best quality and design, regardless of price.As a bonus, each kit is priced to save you money when compared to buy the parts individually.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAbout our 16% Pulley \u003c\/strong\u003eWhen M7 was looking to add a pulley to our existing product offering, we realized that it had to be better and have that M7 \"out-of-the-box\" engineering and mindset. The M7 Supercharger Technology Pulley features a 16% reduction, and a number of improvements over stock and other aftermarket pulley designs.Our revised design for 2014 allows the pulley to be easily positioned deeper onto the supercharger shaft for proper belt alignment. We added shoulders to the outside of the pulley to help prevent the belt from walking off of the pulley surface if you have a weak tensioner or the belt stretches at extreme RPM events. Our proprietary taper-loc shaft locking system offers the highest locking force to the supercharger shaft at the lightest weight. The M7 taper-loc is superior to any other design on the market....PERIOD! This high grip taper-lock system offers both ease of installation and slip free supercharger performance. And by design the assembly is 100% balanced out of the box. The drive belt grooves are machine to exacting SAE-J1459 specifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe M7 Technology Pulley also incorporates an active cooling system that pulls in cool air through the holes in the pulley shoulder. This helps keep belt temperature down. Made from high quality aircraft grade billet steel and gold zinc plated for corrosion resistance and years of trouble free performance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAbout our Lightweight Crank Pulley \u003c\/strong\u003e This beautiful design is a result of extensive computer modeling and CNC machining. A hard anodized coating was added to protect your investment from the elements and ensure a lifetime worth of use. The V-Belt grooves are machined to exacting SAE-J1459 specifications for minimum belt slippage at maximum boost. At 12 ounces, the lightweight M7 4% Crank Pulley assists in reducing rotational mass, which in turn increases horsepower, torque and throttle response. Use this in combination with the M7 16% Supercharger Pulley for maximum performance and boost yourself to the next level of MINI tuning and performance. The crank pulley comes with a brand new high quality ARP bolt and hardened washer for an extra level of assurance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePerformance Belt: \u003c\/strong\u003eWhen using the M7 Crank pulley and 16% Supercharger pulley together, you must use a proper length drive belt or risk slipping or throwing the stock belt. M7 Tuning now offers correct length high performance drive belt that works perfectly with both pulleys!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout our Cold Air Intake System (C.A.R.B approved E.O D-766)   \u003c\/strong\u003eThe M7 MINI Cooper S Cold Air Intake works by sealing a dual stage foam filter inside of a fully enclosed custom manufactured metal housing. The steel box closes off any path for engine heat from getting to the filter, and provides the highest resistance to heat transfer when compared to other intakes on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur dual stage high flow foam filter can be cleaned and re-oiled providing a lifetime of service on your MINI. The over-sized filter gives plenty of filtering capacity without sacrificing airflow on the supercharged Cooper S. The Filter attaches to stock intake piping via a \u003cstrong\u003evelocity stack\u003c\/strong\u003e at the wall of the M7 CAI with a 3\" diameter on the filter side to a 66mm (2.60\") diameter on the engine side. The velocity stack will smooth out the large amount of air entering the intake tract, improving air flow which results in a more efficient intake system. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe M7 intake provides the enclosed filter with pressurized, cold air from the cowl area beneath the windshield \u003cem\u003ewithout\u003c\/em\u003e requiring you to cut any of your factory parts. This allows your car to be returned completely to stock if needed. With simple hand tools, the intake can quickly be installed on your car allowing you more time to enjoy the ride! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eINCLUDES\u003cstrong\u003e:\u003c\/strong\u003e Matt black powder coated Cold Air Intake box, installation hardware and a pre-oiled filter.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003ePROUDLY MADE IN THE USA\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442755801334,"sku":"53-3M7704","price":2008.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/53-3M7704_1__72539.1734359687.1280.1280.jpg?v=1776219361"},{"product_id":"engine-components-m7-speed-maxx-flo-tm-air-intake-system-r55s-r61s-2007-2016-red-pleated-filter-blue-elbow","title":"M7 Speed MAXX-FLO (TM) Air Intake System | R55S-R61S | 2007-2016  | Red Pleated Filter - Blue Elbow","description":"\u003cp\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offering for all Generation 2 MINI. It fits all R55 through R59 MINIs with N14 \u0026amp; N18 Turbocharged engines and the R60 Countryman and R61 Paceman. Our system directly replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with this MAXX-FLO(TM) kit is a 8\" long x 6\" dia \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e pleated washable filter and a \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow\u003c\/p\u003e\n\u003cp\u003eour proven low restriction foam air filter which adds more air flow, engine performance and great sound to your beloved MINI.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eMatte black super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e8\" long x 6\" dia \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eRED\u003c\/span\u003e\u003c\/strong\u003e pleated washable filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube, not to the delicate plastic (and very expensive) MAF sensor housing. \u003c\/li\u003e\n\u003cli\u003eThe M7 R56 Vortex 2 Scoop (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-fiberglass.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop\"\u003ePN 56-4M7202\u003c\/a\u003e or \u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-00-prepreg-carbon-fiber.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop Carbon Fiber\"\u003e56-4M7203\u003c\/a\u003e) will be a fabulous addition to this system in terms of style and air volume entering under the hood and feeding the open filter element. The Vortex 2 Scoop is sold separately.\u003c\/li\u003e\n\u003cli\u003eHeat is \u003cstrong\u003eEnemy\u003c\/strong\u003e \u003cstrong\u003eNumber 1\u003c\/strong\u003e under the hood of the R56. We recommend adding our turbo heat shield (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-min-cooper-high-performance-turbo-heatshield-2007-2010-matte-black.html\" target=\"_blank\" title=\"M7 Speed Turbo Heat Shield N14B\"\u003ePN 56-3M7111\u003c\/a\u003e or \u003ca href=\"https:\/\/www.m7tuning.com\/m7-high-performance-turbo-heatshield-r56-r61-2011-2015-n18b-engine\" title=\"N18 Turbo Heat Shield\"\u003e56-330115\u003c\/a\u003e) as part of the installation. The Turbo Heat Shield is sold separately.\u003c\/li\u003e\n\u003cli\u003eEase of installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"color: #ff0000; font-size: small;\"\u003e100% Made in The USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTECH NOTES:\u003c\/strong\u003e\u003c\/span\u003e If your vehicle is not equipped with a MAF Sensor (most early non-USA models) you will need the optional MAF Spacer|Adapter to connect properly to stock components on your car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf using a stock scoop, removal of the factory blocking plate is recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is C.A.R.B. approval.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEMISSIONS NOTES:\u003c\/span\u003e\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW C.A.R.B. EO #D-766 listed.  \u003c\/strong\u003e\u003cstrong\u003eLegal for use in all 50 States!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed intake system on your car in all 50 States and legally pass state vehicle inspections. The MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442756784374,"sku":"56-312122","price":349.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-312122_1__08357.1756492051.1280.1280.jpg?v=1776219396"},{"product_id":"performance-stage-1-tuner-kit-r55-r59-turbocharged-mini-cooper","title":"Performance Stage 1 Tuner Kit | R55-R59 Turbocharged MINI Cooper","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: medium;\"\u003e\u003cstrong\u003eStage 1 PERFORMANCE TUNER KIT | You save Time \u0026amp; $$$$ with this pre-bundled Kit.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: medium;\"\u003e\u003cstrong\u003eEasy to install - \u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #ff0000; font-size: medium;\"\u003e\u003cstrong\u003eADD upto 20 HP** to your MINI\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000; font-size: small;\"\u003e\u003cstrong\u003eSTAGE 1 PERFORMANCE TUNER KIT INCLUDES\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMAXXBoost Handheld Tuner wit a Stage 1 Tune\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAXX-FLO Intake - \u003c\/strong\u003eFilter and Color Options Available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNGK Iridium Plus Spark Plugs (Set of 4) - \u003c\/strong\u003e+1 Colder Option Available\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional options available\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the Generation 2 Turbo R55-R57 MINIs we have bundled the three components that are needed to run a MAXXBoost Stage 1 Tune into one affordable and easy to install kit. These components will make a Manic Stage 1 Tune perform as intended while adding a great turbo sound and awesome under hood looks to your MINI Cooper.  For a Stage 1 Manic Tune the addition of a higer flow intake and a strong ignition are the minimium upgrades required. Expect approximately 20 HP peak gains with these upgrades.**\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cem\u003eMAXXBoost Flash Tune: \u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese units are easy to use with OBD plug-in connection and touch screen operation offering 100% vehicle up-time. No need to send in your ECU anymore. Just plug in to OBD II and follow the on screen instructions. \u003c\/p\u003e\n\u003cp\u003eWell before the unexpected demise of Manic Tuning in September 2019, M7 began work on developing this system to offer its customers the freedom to do their own software reflash at home without removing or disassembling the ECU. This MAXXBoost system uses the most advanced automotive software and hardware available to communicate with the latest series of Bosch ECUs found in today’s MINIs and other high end Euro cars. By using the factory OBD (onboard diagnostic port), the MAXXBoost Handheld Tuning Tool has the ability to upload any number of standardized or customized performance tunes as well as restore the original software file back to the ECU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.m7tuning.com\/maxxboost-obd-tuner-kit-gen-2-mini-cooper\" target=\"_blank\" title=\"MAXXBoost Tune for MINI Cooper\"\u003eClick HERE\u003c\/a\u003e to learn more about the MAXXBoost Tunes and required vehicle upgrades.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003eMAXX-FLO Intake\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cem\u003e\u003cstrong\u003e:  \u003c\/strong\u003e\u003c\/em\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offereing for all Generation 2 MINI. It fits all Generation 2 turbocharged engines. Our kit replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with every MAXX-FLO(TM) kit is our proven low restriction foam air filter which adds more air flow, engine performance and great sound to your beloved MINI.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eC.A.R.B. EO # D-766 listed\u003c\/li\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eMatte Black super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e12\" long x 5 \" diameter dual stage super high flow\/low restriction washable foam filter that will outflow any air demand your engine will ever need. \u003c\/li\u003e\n\u003cli\u003eOPTIONAL: 8\" long x 6\" dia pleated washable filter is available. (Similiar to K\u0026amp;N)\u003c\/li\u003e\n\u003cli\u003eThe molded silicone connection elbow fits perfectly to the factory MAF housing. Available in four color choices \u003cstrong\u003e| BLACK | BLUE | RED | GREEN\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube, not to the delicate plastic (and very expensive) MAF sensor housing. \u003c\/li\u003e\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\u003cli\u003e100% Made in The USA\u003c\/li\u003e\n\u003cli\u003eIf using a stock scoop, removal of the factory blocking plate is recommended for increased fresh airflow and additional engine compartment cooling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eEMISSIONS NOTE: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eMAXX-FLO Intake System is now C.A.R.B. EO #D-766 listed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed MAXX-FLO Performance Intake System on your car in all 50 States and leagally pass state vehicle inspections. The M7 Speed MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eNGK Laser Iridium Spark Plugs:\u003c\/em\u003e\u003c\/span\u003e \u003c\/strong\u003eThe top choice of professional MINI performance tuners. Standard heat range is recommended for all street driven applications. +1 Colder spark plugs are only recommended for sustained high RPM driving \u0026amp; track use situations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**PERFORMANCE RESULTS: \u003c\/strong\u003eThe actual performance gains (Horsepower \u0026amp; Torque) you achieve are dependent on vehicle condition, mileage, maintenance history, modifications, lubricants, aftermarket parts, performance map selected, fuel quality \u0026amp; octane, air temperature, atmospheric pressure (altitude) and other regional factors. Dynamometer type, condition, calibration and correction factors will also affect performance test results! Horsepower gains advertised are only a reference. Your actual results may be different.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***FOR N18 APPLICATIONS:\u003c\/strong\u003e Your ECU will have to be sent to the M7 Office. We will have your ECU for 2 business days and then will ship back your ECU and handheld tuner with your tune loaded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442757079286,"sku":"56-371101","price":1209.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-371101-mb__80723.1734359694.1280.1280.jpg?v=1776219466"},{"product_id":"engine-components-m7-speed-maxx-flo-tm-air-intake-system-r55s-r61s-2007-2016-blue-pleated-filter-blue-elbow","title":"M7 Speed MAXX-FLO (TM) Air Intake System | R55S-R61S | 2007-2016  | Blue Pleated Filter - Blue Elbow","description":"\u003cp\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offering for all Generation 2 MINI. It fits all R55 through R59 MINIs with N14 \u0026amp; N18 Turbocharged engines and the R60 Countryman and R61 Paceman. Our system directly replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with this MAXX-FLO(TM) kit is a 8\" long x 6\" dia \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e pleated washable filter and a \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow\u003c\/p\u003e\n\u003cp\u003eour proven low restriction foam air filter which adds more air flow, engine performance and great sound to your beloved MINI.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eMatte black super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e8\" long x 6\" dia \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eRED\u003c\/span\u003e\u003c\/strong\u003e pleated washable filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube, not to the delicate plastic (and very expensive) MAF sensor housing. \u003c\/li\u003e\n\u003cli\u003eThe M7 R56 Vortex 2 Scoop (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-fiberglass.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop\"\u003ePN 56-4M7202\u003c\/a\u003e or \u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-00-prepreg-carbon-fiber.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop Carbon Fiber\"\u003e56-4M7203\u003c\/a\u003e) will be a fabulous addition to this system in terms of style and air volume entering under the hood and feeding the open filter element. The Vortex 2 Scoop is sold separately.\u003c\/li\u003e\n\u003cli\u003eHeat is \u003cstrong\u003eEnemy\u003c\/strong\u003e \u003cstrong\u003eNumber 1\u003c\/strong\u003e under the hood of the R56. We recommend adding our turbo heat shield (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-min-cooper-high-performance-turbo-heatshield-2007-2010-matte-black.html\" target=\"_blank\" title=\"M7 Speed Turbo Heat Shield N14B\"\u003ePN 56-3M7111\u003c\/a\u003e or \u003ca href=\"https:\/\/www.m7tuning.com\/m7-high-performance-turbo-heatshield-r56-r61-2011-2015-n18b-engine\" title=\"N18 Turbo Heat Shield\"\u003e56-330115\u003c\/a\u003e) as part of the installation. The Turbo Heat Shield is sold separately.\u003c\/li\u003e\n\u003cli\u003eEase of installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"color: #ff0000; font-size: small;\"\u003e100% Made in The USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTECH NOTES:\u003c\/strong\u003e\u003c\/span\u003e If your vehicle is not equipped with a MAF Sensor (most early non-USA models) you will need the optional MAF Spacer|Adapter to connect properly to stock components on your car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf using a stock scoop, removal of the factory blocking plate is recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is C.A.R.B. approval.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEMISSIONS NOTES:\u003c\/span\u003e\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW C.A.R.B. EO #D-766 listed.  \u003c\/strong\u003e\u003cstrong\u003eLegal for use in all 50 States!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed intake system on your car in all 50 States and legally pass state vehicle inspections. The MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442757275894,"sku":"56-312125","price":349.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-312125_1__96383.1756491847.1280.1280.jpg?v=1776219528"},{"product_id":"high-performance-stage-1-tuner-kit-r55-r59-turbocharged-mini-cooper","title":"HIGH Performance Stage 1 Tuner Kit | R55-R59 Turbocharged MINI Cooper","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: medium;\"\u003e\u003cstrong\u003eHIGH Performance Stage 1 TUNER KIT | This Kit Saves TIME \u0026amp; $$$$\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: medium;\"\u003e\u003cstrong\u003eEasy to Install | ADD up to 30 HP** to your MINI\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000; font-size: small;\"\u003e\u003cstrong\u003eThe HIGH Performance STAGE 1 TUNER KIT INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMAXXBoost Handheld Tuner Kit with a Stage 1 Tune\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAXX-FLO Intake - \u003c\/strong\u003eFilter and Color Options Available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM7 Hot Side Turbo Charge Pipe -\u003c\/strong\u003e Color Options Available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM7 Cold Side High Flow Elbow Kit -\u003c\/strong\u003e Color Options Available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNGK Iridium Plus Spark Plugs (Set of 4) - \u003c\/strong\u003e+1 Colder Option Available\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOther Options Available when ordering to build and customize your own system.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the R55-R59 MINI Turbo cars we have bundled five of our most popular engine performance products into an affordable and easy to install kit. These components add power, great turbo sound and awesome under hood looks to your MINI Cooper.  Design your own kit...many color options are available. Save big $$$$ when you buy as a bundle!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cem\u003eMAXXBoost Flash Tune:  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003eThese units are easy to use with OBD plug-in connection and touch screen operation offering 100% vehicle up-time. No need to send in your ECU anymore. Just plug in to OBD II and follow the on screen instructions. \u003c\/p\u003e\n\u003cp\u003eWell before the unexpected demise of Manic Tuning in September 2019, M7 began work on developing this system to offer its customers the freedom to do their own software reflash at home without removing or disassembling the ECU. This MAXXBoost system uses the most advanced automotive software and hardware available to communicate with the latest series of Bosch ECUs found in today’s MINIs and other high end Euro cars. By using the factory OBD (onboard diagnostic port), the MAXXBoost Handheld Tuning Tool has the ability to upload any number of standardized or customized performance tunes as well as restore the original software file back to the ECU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.m7tuning.com\/maxxboost-obd-tuner-kit-gen-2-mini-cooper\" target=\"_blank\" title=\"MAXXBoost Tune for MINI Cooper\"\u003eClick HERE\u003c\/a\u003e to learn more about the MAXXBoost Tunes and required vehicle upgrades.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eMAXX-FLO Intake:\u003c\/em\u003e\u003c\/span\u003e  \u003c\/strong\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offereing for all Generation 2 MINI. It fits all R55 through R59 MINIs with N14 \u0026amp; N18 Turbocharged engines and the R60 Countryman and R61 Paceman. Our system directly replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with every MAXX-FLO(TM) kit is our proven low restriction foam air filter which adds more air flow, engine performance and great sound to your beloved MINI.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eC.A.R.B. EO #D-766 listed\u003c\/li\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eMatte black super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e12\" long x 5 \" diameter dual stage super high flow\/low restriction washable foam filter that will outflow any air demand your engine will ever need. \u003c\/li\u003e\n\u003cli\u003eOPTIONAL: 8\" long x 6\" dia pleated washable filter is available\u003c\/li\u003e\n\u003cli\u003eThe 100% silicone connection elbow fits perfectly to the factory MAF housing. Available in 3 color choices \u003cstrong\u003e| BLACK | BLUE | RED |\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube, not to the delicate plastic (and very expensive) MAF sensor housing. \u003c\/li\u003e\n\u003cli\u003eHeat is \u003cstrong\u003eEnemy\u003c\/strong\u003e \u003cstrong\u003eNumber 1\u003c\/strong\u003e under the hood of the R56. We recommend adding our turbo heat shield (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-min-cooper-high-performance-turbo-heatshield-2007-2010-matte-black.html\" target=\"_blank\" title=\"M7 Speed Turbo Heat Shield N14B\"\u003ePN 56-3M7111\u003c\/a\u003e or \u003ca href=\"http:\/\/www.m7tuning.com\/m7-high-performance-turbo-heatshield-r56-2011-2013.html\" target=\"_blank\" title=\"M7 Speed Turbo Heat Shield N18B Engine\"\u003e56-3M7115\u003c\/a\u003e) as part of the installation. The Turbo Heatsheild is sold separately.\u003c\/li\u003e\n\u003cli\u003eEase of installation\u003c\/li\u003e\n\u003cli\u003eMade in The USA\u003c\/li\u003e\n\u003cli\u003eIf using a stock scoop, removal of the factory blocking plate is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eEMISSIONS NOTE: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eMAXX-FLO Intake System is now C.A.R.B. EO #D-766 listed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed MAXX-FLO Performance Intake System on your car in all 50 States and leagally pass state vehicle inspections. The M7 Speed MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eM7 Intercooler Pipe Kit:\u003c\/span\u003e \u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003eThe M7 Pre-Intercooler Charge Pipe and cold side elbow kit are silicone hoses that which replace the factiry OE rubber hoses. The OE parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. With the M7 Pre-Intercooler Charge Pipe and Cold Side Elbow Kit, the charged air coming from the turbocharger sees nothing but large diameter smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to and from the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it! \u003cbr\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 3.6 horsepower and 11.3 ft-lb of torque AT THE WHEELS! \u003cbr\u003eIncrease your MINI's performance, awaken the pure turbo sound while sprucing up the engine bay. NEW! Now includes the Cold side large bore elbow kit with sound generator delete for even more power and better throttle response. Available in \u003cstrong\u003eBLACK | RED | BLUE | GREEN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eNGK Laser Iridium Spark Plugs:\u003c\/em\u003e\u003c\/span\u003e \u003c\/strong\u003eThe top choice of professional MINI performance tuners. Standard heat range is recommended for all street driven applications. +1 Colder spark plugs are only recommended for sustained high RPM driving \u0026amp; track use situations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**PERFORMANCE RESULTS: \u003c\/strong\u003eThe actual performance gains (Horsepower \u0026amp; Torque) you achieve are dependent on vehicle condition, mileage, maintenance history, modifications, lubricants, aftermarket parts, performance map selected, fuel quality \u0026amp; octane, air temperature, atmospheric pressure (altitude) and other regional factors. Dynamometer type, condition, calibration and correction factors will also affect performance test results! Horsepower gains advertised are only a reference. Your actual results may be different.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003cstrong\u003e***\u003c\/strong\u003eFOR N18 APPLICATIONS\u003c\/strong\u003e: Your ECU will have to be sent to the M7 Office. We will have your ECU for 2 business days and then will ship back your ECU and handheld tuner with your tune loaded.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442757308662,"sku":"56-371102","price":1519.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-371102_1__61602.1734359702.1280.1280.jpg?v=1776219548"},{"product_id":"engine-components-m7-speed-maxx-flo-tm-air-intake-system-r55s-r61s-2007-2016-red-foam-filter-green-elbow","title":"M7 Speed MAXX-FLO (TM) Air Intake System | R55S-R61S | 2007-2016 | Red Foam Filter - Green Elbow","description":"\u003cp\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offereing for all Generation 2 MINI. It fits all R55 through R59 MINIs with N14 \u0026amp; N18 Turbocharged engines and the R60 Countryman and R61 Paceman. Our system directly replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with every MAXX-FLO(TM) kit is our proven low restriction foam air filter which adds more air flow, engine performance and great sound to your beloved MINI.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eMatte black super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e12\" long x 5 \" diameter dual stage super high flow\/low restriction washable \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eRED\u003c\/span\u003e\u003c\/strong\u003e foam filter that will outflow any air demand your engine will ever need. \u003c\/li\u003e\n\u003cli\u003eThe 100% silicone connection \u003cspan style=\"color: #00ff00;\"\u003e\u003cstrong\u003eGREEN\u003c\/strong\u003e\u003c\/span\u003e elbow fits perfectly to the factory MAF housing.\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube, not to the delicate plastic (and very expensive) MAF sensor housing. \u003c\/li\u003e\n\u003cli\u003eThe M7 R56 Vortex 2 Scoop (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-fiberglass.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop\"\u003ePN 56-4M7202\u003c\/a\u003e or \u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-00-prepreg-carbon-fiber.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop Carbon Fiber\"\u003e56-4M7203\u003c\/a\u003e) will be a fabulous addition to this system in terms of style and air volume entering under the hood and feeding the open filter element. The Vortex 2 Scoop is sold separately.\u003c\/li\u003e\n\u003cli\u003eHeat is \u003cstrong\u003eEnemy\u003c\/strong\u003e \u003cstrong\u003eNumber 1\u003c\/strong\u003e under the hood of the R56. We recommend adding our turbo heat shield (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-min-cooper-high-performance-turbo-heatshield-2007-2010-matte-black.html\" target=\"_blank\" title=\"M7 Speed Turbo Heat Shield N14B\"\u003ePN 56-3M7111\u003c\/a\u003e or \u003ca href=\"http:\/\/www.m7tuning.com\/m7-high-performance-turbo-heatshield-r56-2011-2013.html\" target=\"_blank\" title=\"M7 Speed Turbo Heat Shield N18B Engine\"\u003e56-3M7115\u003c\/a\u003e) as part of the installation. The Turbo Heatsheild is sold separately.\u003c\/li\u003e\n\u003cli\u003eEase of installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"color: #ff0000; font-size: small;\"\u003e100% Made in The USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTECH NOTES:\u003c\/strong\u003e\u003c\/span\u003e If your vehicle is not equipped with a MAF Sensor (most early non-USA models) you will need the optional MAF Spacer|Adapter to connect properly to stock components on your car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf using a stock scoop, removal of the factory blocking plate is recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is C.A.R.B. approval.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEMISSIONS NOTES:\u003c\/span\u003e\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW C.A.R.B. EO #D-766 listed.  \u003c\/strong\u003e\u003cstrong\u003eLegal for use in all 50 States!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed intake system on your car in all 50 States and legally pass state vehicle inspections. The MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442789224694,"sku":"56-312131","price":317.52,"currency_code":"USD","in_stock":false}]},{"product_id":"engine-components-cold-side-intercooler-elbow-kit-black-gen-2-turbocharged-mini-cooper","title":"Cold Side Intercooler Elbow Kit | Black | Gen 2 Turbocharged MINI Cooper","description":"\u003cp\u003e\u003cstrong\u003eFEED YOUR MACHINE MORE AIR | MAKE MORE POWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM7 Speed introduces its new COLD SIDE Intercooler Elbow Kit. Made from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe.  Available in four (4) popular colors \u003cstrong\u003eBLACK\u003c\/strong\u003e, \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e, \u003cspan style=\"color: #3366ff;\"\u003e\u003cstrong\u003eBLUE\u003c\/strong\u003e\u003c\/span\u003e and \u003cspan style=\"color: #00ff00;\"\u003e\u003cstrong\u003eHIGHLIGHTER GREEN\u003c\/strong\u003e\u003c\/span\u003e. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts.  And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e\n\u003cp\u003eAlso available combined with our hot side intercooler pipe for a complete and matching underhood upgrade.  CLICK HERE\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442789355766,"sku":"56-330201","price":154.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-330201_1__31007.1734359683.1280.1280.jpg?v=1776219722"},{"product_id":"m7-speed-products-intake-intercooler-hose-bundle-mini-countryman-paceman","title":"Intake \u0026 Intercooler Hose Bundle | MINI Countryman-Paceman","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFEED YOUR Countryman \u0026amp; Paceman MINI MORE AIR | MAKE MORE POWER\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eImprove the MINI's breathing capacity by replacing all the restricted intake hose with larger and smoother high flowing parts. We have bundled together in one kit the M7 Speed Intake Hose, Hot Side Turbo Charge Pipe and the Cold Side Elbow Kit. Offered four M7 colors (BLACK, RED, BLUE and GREEN). These are direct bolt-on high performance parts offering superior durability, much better airflow and virtually unlimited service life.  In addition to outstanding performance they look super cool and adds to the under hood WOW factor your MINI so desperately needs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eINTAKE HOSE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe M7 High Flow N18 Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part.  It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose\/turbocharger connection. The common problem of sucking the reducer through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true “direct-fit” bolt-on part for any late model Gen 2 MINI equipped with the N18 engine.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with two electronic replicators that plug directly into the OE electrical harness. Plus all the necessary hardware to make this an easiy DIY install.\u003c\/li\u003e\n\u003cli\u003e45mm turbo connection diameter eliminates the need to use the problematic factory reducer bushing.\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part featuring a super smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eRetains stock main PCV hose connection location and size for ease of installation. It can be used with the OE PCV hose or any oil catch can system.\u003c\/li\u003e\n\u003cli\u003eRelocates the secondary engine block vent hose connection to the underside of the intake hose to help beautify the MINI’s engine compartment appearance.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation. Direct bolt-on product.\u003c\/li\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors. BLACK | RED | BLUE | GREEN\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.77” [45mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHOT-SIDE TURBO CHARGE PIPE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eM7 Pre-Intercooler Charge Pipe\u003c\/strong\u003e is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. \u003cbr\u003e\u003cbr\u003eWith the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!\u003cbr\u003e\u003cbr\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of\u003cstrong\u003e 3.6 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCOLD SIDE INTERCOOLER ELBOW KIT\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts. And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50729992093942,"sku":"60-31830-BLK","price":541.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-31830__96149.1734359685.1280.1280.png?v=1776219742"},{"product_id":"ngk-iridium-ix-spark-plugs-set-of-4-1-step-colder-gen-2-turbo-mini-cooper","title":"NGK Iridium IX Spark Plugs (Set of 4) +1 Step Colder | Gen 2 Turbo MINI Cooper","description":"\u003cp\u003eDesigned specifically for the performance enthusiast. Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in a set of 4\u003c\/li\u003e\n\u003cli\u003eFine Iridium tip ensures high durability and a consistently stable spark\u003c\/li\u003e\n\u003cli\u003ePlatinum Ground Electrode\u003c\/li\u003e\n\u003cli\u003e0.6mm laser welded Iridium tip\u003c\/li\u003e\n\u003cli\u003e16mm (5\/8\") standard hex wrenching design\u003c\/li\u003e\n\u003cli\u003eGAP-preset at 0.024\" (0.6mm)\u003c\/li\u003e\n\u003cli\u003eIridium alloy has extremely high melting point, perfect for today's high-tech, high-performance engines\u003c\/li\u003e\n\u003cli\u003eTrivalent Metal Plating - superior anti-corrosion and anti-seizing properties\u003c\/li\u003e\n\u003cli\u003eOutstanding acceleration, high fuel efficiency and durability\u003c\/li\u003e\n\u003cli\u003eUltimate design, technology and performance.\u003c\/li\u003e\n\u003cli\u003eIridium alloy is extremely durable against heat, corrosion, and electrical wear\u003c\/li\u003e\n\u003cli\u003eTapered ground electrode to minimize \"quenching effect\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect desired heat range when ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eStandard heat range Plugs are recommended for ALL Street Driven Turbo MINIs with all levels of modification.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003e+1 Colder plugs are intended for cars with extreme performance engine mods, Stage 3 Manic Tunes and sustained high RPM track driving running 100+ octane fuel. Not recommended for street driven cars.  Standard heat range plugs are recommended for all street driven cars.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSpark Plugs are not refundable or returnable\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":50442789683446,"sku":"56-3NGK702","price":100.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-3NGK702_1__97086.1733771035.1280.1280.jpg?v=1776219781"},{"product_id":"m7-speed-maxx-flo-tm-air-intake-system-r55s-r61s-2007-2016-red-pleated-filter-green-elbow","title":"M7 Speed MAXX-FLO (TM) Air Intake System | R55S-R61S | 2007-2016 | Red Pleated Filter - Green Elbow","description":"\u003cp\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offering for all Generation 2 MINI. It fits all R55 through R59 MINIs with N14 \u0026amp; N18 Turbocharged engines and the R60 Countryman and R61 Paceman. Our system directly replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with this MAXX-FLO(TM) kit ia an 8\" long x 6\" dia \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e pleated washable filter and a \u003cspan style=\"color: #00ff00; background-color: #c0c0c0;\"\u003e\u003cstrong\u003eGREEN\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow with all new clamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eMatte black super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e8\" long x 6\" dia \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e pleated washable filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #00ff00; background-color: #c0c0c0;\"\u003e\u003cstrong\u003eGREEN\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube, not to the delicate plastic (and very expensive) MAF sensor housing. \u003c\/li\u003e\n\u003cli\u003eThe M7 R56 Vortex 2 Scoop (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-fiberglass.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop\"\u003ePN 56-4M7202\u003c\/a\u003e or \u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-00-prepreg-carbon-fiber.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop Carbon Fiber\"\u003e56-4M7203\u003c\/a\u003e) will be a fabulous addition to this system in terms of style and air volume entering under the hood and feeding the open filter element. The Vortex 2 Scoop is sold separately.\u003c\/li\u003e\n\u003cli\u003eHeat is \u003cstrong\u003eEnemy\u003c\/strong\u003e \u003cstrong\u003eNumber 1\u003c\/strong\u003e under the hood of the R56. We recommend adding our turbo heat shield (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-min-cooper-high-performance-turbo-heatshield-2007-2010-matte-black.html\" target=\"_blank\" title=\"M7 Speed Turbo Heat Shield N14B\"\u003ePN 56-3M7111\u003c\/a\u003e or \u003ca href=\"https:\/\/www.m7tuning.com\/m7-high-performance-turbo-heatshield-r56-r61-2011-2015-n18b-engine\" title=\"N18 Turbo Heat Shield\"\u003e56-330115\u003c\/a\u003e) as part of the installation. The Turbo Heat Shield is sold separately.\u003c\/li\u003e\n\u003cli\u003eEase of installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"color: #ff0000; font-size: small;\"\u003e100% Made in The USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTECH NOTES:\u003c\/strong\u003e\u003c\/span\u003e If your vehicle is not equipped with a MAF Sensor (most early non-USA models) you will need the optional MAF Spacer|Adapter to connect properly to stock components on your car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf using a stock scoop, removal of the factory blocking plate is recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is C.A.R.B. approval.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEMISSIONS NOTES:\u003c\/span\u003e\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW C.A.R.B. EO #D-766 listed.  \u003c\/strong\u003e\u003cstrong\u003eLegal for use in all 50 States!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed intake system on your car in all 50 States and legally pass state vehicle inspections. The MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442791223542,"sku":"56-312132","price":349.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-312132_1__79658.1756492354.1280.1280.jpg?v=1776219866"},{"product_id":"engine-components-cold-side-intercooler-elbow-kit-red-gen-2-turbocharged-mini-cooper","title":"Cold Side Intercooler Elbow Kit | Red | Gen 2 Turbocharged MINI Cooper","description":"\u003cp\u003e\u003cstrong\u003eFEED YOUR MACHINE MORE AIR | MAKE MORE POWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM7 Speed introduces its new COLD SIDE Intercooler Elbow Kit. Made from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe.  Available in four (4) popular colors \u003cstrong\u003eBLACK\u003c\/strong\u003e, \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e, \u003cspan style=\"color: #3366ff;\"\u003e\u003cstrong\u003eBLUE\u003c\/strong\u003e\u003c\/span\u003e and \u003cspan style=\"color: #00ff00;\"\u003e\u003cstrong\u003eHIGHLIGHTER GREEN\u003c\/strong\u003e\u003c\/span\u003e. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts.  And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e\n\u003cp\u003eAlso available combined with our hot side intercooler pipe for a complete and matching underhood upgrade.  CLICK HERE\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442793451766,"sku":"56-330202","price":154.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-330202_1__07423.1734359687.1280.1280.jpg?v=1776219895"},{"product_id":"m7-speed-products-n18-intake-intercooler-hose-bundle-mini-countryman-paceman-black","title":"N18 Intake \u0026 Intercooler Hose Bundle | MINI Countryman-Paceman-Black","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFEED YOUR N18 MINI MORE AIR | MAKE MORE POWER\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eImprove the MINI's breathing capacity by replacing all the restricted intake hose with larger and smoother high flowing parts. We have bundled together in one kit the M7 Speed Intake Hose, Hot Side Turbo Charge Pipe and the Cold Side Elbow Kit. Offered four M7 colors (BLACK, RED, BLUE and GREEN). These are direct bolt-on high performance parts offering superior durability, much better airflow and virtually unlimited service life.  In addition to outstanding performance they look super cool and adds to the under hood WOW factor your MINI so desperately needs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eINTAKE HOSE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe M7 High Flow N18 Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part.  It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose\/turbocharger connection. The common problem of sucking the reducer through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true “direct-fit” bolt-on part for any late model Gen 2 MINI equipped with the N18 engine.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with two electronic replicators that plug directly into the OE electrical harness. Plus all the necessary hardware to make this an easiy DIY install.\u003c\/li\u003e\n\u003cli\u003e45mm turbo connection diameter eliminates the need to use the problematic factory reducer bushing.\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part featuring a super smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eRetains stock main PCV hose connection location and size for ease of installation. It can be used with the OE PCV hose or any oil catch can system.\u003c\/li\u003e\n\u003cli\u003eRelocates the secondary engine block vent hose connection to the underside of the intake hose to help beautify the MINI’s engine compartment appearance.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation. Direct bolt-on product.\u003c\/li\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors. BLACK | RED | BLUE | GREEN\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.77” [45mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHOT-SIDE TURBO CHARGE PIPE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eM7 Pre-Intercooler Charge Pipe\u003c\/strong\u003e is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. \u003cbr\u003e\u003cbr\u003eWith the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!\u003cbr\u003e\u003cbr\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of\u003cstrong\u003e 3.6 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCOLD SIDE INTERCOOLER ELBOW KIT\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts. And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442793713910,"sku":"60-318301","price":487.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/60-318301_1__04935.1734359688.1280.1280.jpg?v=1776219944"},{"product_id":"engine-components-n18-high-flow-silicone-intake-hose-4-colors-to-choose-from","title":"N18 High Flow Silicone Intake Hose | 4 Colors to Choose From","description":"\u003cp\u003eAvailable in four colors: \u003cstrong\u003eBLACK | \u003cspan style=\"color: #ff0000;\"\u003eRED \u003cspan style=\"color: #000000;\"\u003e|\u003c\/span\u003e\u003c\/span\u003e \u003cspan style=\"color: #0000ff;\"\u003eBLUE\u003c\/span\u003e | \u003cspan style=\"color: #00ff00;\"\u003eGREEN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the later model N18 turbocharged Prince engine. Offered in the four standard M7 colors \u003cstrong\u003eBLACK | \u003cspan style=\"color: #ff0000;\"\u003eRED \u003cspan style=\"color: #000000;\"\u003e|\u003c\/span\u003e\u003c\/span\u003e \u003cspan style=\"color: #0000ff;\"\u003eBLUE\u003c\/span\u003e | \u003cspan style=\"color: #00ff00;\"\u003eGREEN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe M7 High Flow Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part.  It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose\/turbocharger connection. The common occurring event of sucking this part through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true “direct-fit” bolt-on part for any late model Gen 2 MINI equipped with the N18 engine. In addition to outstanding performance and the aforementioned design improvements it looks super cool and adds the under hood WOW factor MINI so desperately need.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with two electronic replicators that plug directly into the OE electrical harness. Plus everything needed for an easy install.\u003c\/li\u003e\n\u003cli\u003e45mm turbo connection diameter eliminates the need to use the problematic factory reducer bushing.\u003c\/li\u003e\n\u003cli\u003eWill fit up tp 48mm inlet diameter with minor modifications\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part featuring a super smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eRetains stock main PCV hose connection location and size for ease of installation. It can be used with the OE PCV hose or any oil catch can system.\u003c\/li\u003e\n\u003cli\u003eRelocates the secondary engine block vent hose connection to the underside of the intake hose to help beautify the MINI’s engine compartment appearance.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation. Direct bolt-on product.\u003c\/li\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors. BLACK | RED | BLUE | GREEN\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.77” [45mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe intake hose is also offered in bundled kits for the R55 through R59 models and the R60-R61 models. These kits include the N18 intake hose, the cold-side elbow kit (56-33020X) and the hot-side turbo charge pipe (56-3M710X or 60-3M710X). Search PN 56-31830  or for Countryman (R60) and Paceman (R61) 60-31830\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50723566584054,"sku":"56-31820","price":238.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-31820x-1__88101.1693950709_1__00034.1734359689.1280.1280.png?v=1776219991"},{"product_id":"m7-speed-products-m7-pre-intercooler-charge-pipe-r60-countryman-r61-paceman","title":"M7 Pre-Intercooler Charge Pipe | R60 Countryman - R61 Paceman","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThe M7 Pre-Intercooler Charge Pipe for the R60-R61 MINI platform is a high flow 100% silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM hose has an inline muffler designed from the factory to silence any \"turbo\" sound by breaking up the air path with restrictive piping and baffles. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eInstalling the M7 Pre-Intercooler Charge Pipe eliminates the restrictive factory muffler. The pressurized charge air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted free flowing airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 4 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eIncrease your MINI's performance, awaken the pure turbo sound while sprucing up the engine bay. \u003cstrong\u003eAvailable in BLACK | \u003cspan style=\"color: #ff0000;\"\u003eRED\u003c\/span\u003e | \u003cspan style=\"color: #0000ff;\"\u003eBLUE | \u003cspan style=\"color: #00ff00;\"\u003eGREEN\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; color: #000000;\"\u003eEasy afternoon bolt-on project.  (If you have small hands!)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50723565371638,"sku":"60-3M710","price":172.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/60-3M710_1__30094.1734359690.1280.1280.jpg?v=1776220008"},{"product_id":"engine-components-cold-side-intercooler-elbow-kit-blue-gen-2-turbocharged-mini-cooper","title":"Cold Side Intercooler Elbow Kit | Blue | Gen 2 Turbocharged MINI Cooper","description":"\u003cp\u003e\u003cstrong\u003eFEED YOUR MACHINE MORE AIR | MAKE MORE POWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM7 Speed introduces its new COLD SIDE Intercooler Elbow Kit. Made from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe.  Available in four (4) popular colors \u003cstrong\u003eBLACK\u003c\/strong\u003e, \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e, \u003cspan style=\"color: #3366ff;\"\u003e\u003cstrong\u003eBLUE\u003c\/strong\u003e\u003c\/span\u003e and \u003cspan style=\"color: #00ff00;\"\u003e\u003cstrong\u003eHIGHLIGHTER GREEN\u003c\/strong\u003e\u003c\/span\u003e. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts.  And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e\n\u003cp\u003eAlso available combined with our hot side intercooler pipe for a complete and matching underhood upgrade.  CLICK HERE\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442824220918,"sku":"56-330203","price":154.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-330203_1__22049.1734359677.1280.1280.jpg?v=1776220024"},{"product_id":"m7-speed-maxx-flo-tm-air-intake-system-r55s-r61s-2007-2016-blue-pleated-filter-green-elbow","title":"M7 Speed MAXX-FLO (TM) Air Intake System | R55S-R61S | 2007-2016 | Blue Pleated Filter - Green Elbow","description":"\u003cp\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offering for all Generation 2 MINI. It fits all R55 through R59 MINIs with N14 \u0026amp; N18 Turbocharged engines and the R60 Countryman and R61 Paceman. Our system directly replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with this MAXX-FLO(TM) kit ia an 8\" long x 6\" dia \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eBLUE\u003c\/strong\u003e \u003c\/span\u003epleated washable filter and a \u003cspan style=\"color: #00ff00; background-color: #c0c0c0;\"\u003e\u003cstrong\u003eGREEN\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow with all new clamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eMatte black super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e8\" long x 6\" dia \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eBLUE\u003c\/strong\u003e\u003c\/span\u003e pleated washable filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #00ff00; background-color: #c0c0c0;\"\u003e\u003cstrong\u003eGREEN\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube, not to the delicate plastic (and very expensive) MAF sensor housing. \u003c\/li\u003e\n\u003cli\u003eThe M7 R56 Vortex 2 Scoop (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-fiberglass.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop\"\u003ePN 56-4M7202\u003c\/a\u003e or \u003ca href=\"http:\/\/www.m7tuning.com\/m7-vortex-2-scoop-00-prepreg-carbon-fiber.html\" target=\"_blank\" title=\"M7 Speed Vortex 2 Hood Scoop Carbon Fiber\"\u003e56-4M7203\u003c\/a\u003e) will be a fabulous addition to this system in terms of style and air volume entering under the hood and feeding the open filter element. The Vortex 2 Scoop is sold separately.\u003c\/li\u003e\n\u003cli\u003eHeat is \u003cstrong\u003eEnemy\u003c\/strong\u003e \u003cstrong\u003eNumber 1\u003c\/strong\u003e under the hood of the R56. We recommend adding our turbo heat shield (\u003ca href=\"http:\/\/www.m7tuning.com\/m7-min-cooper-high-performance-turbo-heatshield-2007-2010-matte-black.html\" target=\"_blank\" title=\"M7 Speed Turbo Heat Shield N14B\"\u003ePN 56-3M7111\u003c\/a\u003e or \u003ca href=\"https:\/\/www.m7tuning.com\/m7-high-performance-turbo-heatshield-r56-r61-2011-2015-n18b-engine\" title=\"N18 Turbo Heat Shield\"\u003e56-330115\u003c\/a\u003e) as part of the installation. The Turbo Heat Shield is sold separately.\u003c\/li\u003e\n\u003cli\u003eEase of installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"color: #ff0000; font-size: small;\"\u003e100% Made in The USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTECH NOTES:\u003c\/strong\u003e\u003c\/span\u003e If your vehicle is not equipped with a MAF Sensor (most early non-USA models) you will need the optional MAF Spacer|Adapter to connect properly to stock components on your car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf using a stock scoop, removal of the factory blocking plate is recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is C.A.R.B. approval.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEMISSIONS NOTES:\u003c\/span\u003e\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW C.A.R.B. EO #D-766 listed.  \u003c\/strong\u003e\u003cstrong\u003eLegal for use in all 50 States!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed intake system on your car in all 50 States and legally pass state vehicle inspections. The MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442825662710,"sku":"56-312135","price":349.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-312135_1__30575.1756491957.1280.1280.jpg?v=1776220066"},{"product_id":"engine-components-n18-intake-intercooler-hose-bundle-mini-countryman-paceman-red","title":"N18 Intake \u0026 Intercooler Hose Bundle | MINI Countryman-Paceman-Red","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFEED YOUR N18 MINI MORE AIR | MAKE MORE POWER\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eImprove the MINI's breathing capacity by replacing all the restricted intake hose with larger and smoother high flowing parts. We have bundled together in one kit the M7 Speed Intake Hose, Hot Side Turbo Charge Pipe and the Cold Side Elbow Kit. Offered four M7 colors (BLACK, RED, BLUE and GREEN). These are direct bolt-on high performance parts offering superior durability, much better airflow and virtually unlimited service life.  In addition to outstanding performance they look super cool and adds to the under hood WOW factor your MINI so desperately needs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eINTAKE HOSE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe M7 High Flow N18 Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part.  It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose\/turbocharger connection. The common problem of sucking the reducer through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true “direct-fit” bolt-on part for any late model Gen 2 MINI equipped with the N18 engine.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with two electronic replicators that plug directly into the OE electrical harness. Plus all the necessary hardware to make this an easiy DIY install.\u003c\/li\u003e\n\u003cli\u003e45mm turbo connection diameter eliminates the need to use the problematic factory reducer bushing.\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part featuring a super smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eRetains stock main PCV hose connection location and size for ease of installation. It can be used with the OE PCV hose or any oil catch can system.\u003c\/li\u003e\n\u003cli\u003eRelocates the secondary engine block vent hose connection to the underside of the intake hose to help beautify the MINI’s engine compartment appearance.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation. Direct bolt-on product.\u003c\/li\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors. BLACK | RED | BLUE | GREEN\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.77” [45mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHOT-SIDE TURBO CHARGE PIPE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eM7 Pre-Intercooler Charge Pipe\u003c\/strong\u003e is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. \u003cbr\u003e\u003cbr\u003eWith the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!\u003cbr\u003e\u003cbr\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of\u003cstrong\u003e 3.6 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCOLD SIDE INTERCOOLER ELBOW KIT\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts. And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442825695478,"sku":"60-318302","price":487.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/60-318302_2__27920.1738258423.1280.1280.jpg?v=1776220089"},{"product_id":"engine-components-cold-side-intercooler-elbow-kit-green-gen-2-turbocharged-mini-cooper","title":"Cold Side Intercooler Elbow Kit | Green | Gen 2 Turbocharged MINI Cooper","description":"\u003cp\u003e\u003cstrong\u003eFEED YOUR MACHINE MORE AIR | MAKE MORE POWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM7 Speed introduces its new COLD SIDE Intercooler Elbow Kit. Made from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe.  Available in four (4) popular colors \u003cstrong\u003eBLACK\u003c\/strong\u003e, \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e, \u003cspan style=\"color: #3366ff;\"\u003e\u003cstrong\u003eBLUE\u003c\/strong\u003e\u003c\/span\u003e and \u003cspan style=\"color: #00ff00;\"\u003e\u003cstrong\u003eHIGHLIGHTER GREEN\u003c\/strong\u003e\u003c\/span\u003e. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts.  And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e\n\u003cp\u003eAlso available combined with our hot side intercooler pipe for a complete and matching underhood upgrade.  CLICK HERE\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442825990390,"sku":"56-330204","price":154.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-330204_1__59334.1734359678.1280.1280.jpg?v=1776220134"},{"product_id":"m7-speed-products-m7-pre-intercooler-charge-pipe-black-r60-countryman-r61-paceman","title":"M7 Pre-Intercooler Charge Pipe | Black | R60 Countryman - R61 Paceman","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThe M7 Pre-Intercooler Charge Pipe is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eWith the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 3.6 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eIncrease your MINI's performance, awaken the pure turbo sound while sprucing up the engine bay. \u003cstrong\u003eAvailable in BLACK | \u003cspan style=\"color: #ff0000;\"\u003eRED\u003c\/span\u003e | \u003cspan style=\"color: #0000ff;\"\u003eBLUE | \u003cspan style=\"color: #00ff00;\"\u003eGREEN\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; color: #00ff00;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442826088694,"sku":"60-3M7101","price":154.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/60-3M7101_1__10372.1753974955.1280.1280.jpg?v=1776220154"},{"product_id":"engine-components-high-flow-silicone-intake-hose-n18-mini-cooper-black","title":"High Flow Silicone Intake Hose N18 MINI Cooper-Black","description":"\u003cp\u003e100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the later model N18 turbocharged Prince engine. Offered in the four standard M7 colors (BLACK, RED, BLUE and GREEN). \u003c\/p\u003e\n\u003cp\u003eThe M7 High Flow Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part.  It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose\/turbocharger connection. The common occurring event of sucking this part through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true “direct-fit” bolt-on part for any late model Gen 2 MINI equipped with the N18 engine. In addition to outstanding performance and the aforementioned design improvements it looks super cool and adds the under hood WOW factor MINI so desperately need.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with two electronic replicators that plug directly into the OE electrical harness. Plus everything needed for an easy install.\u003c\/li\u003e\n\u003cli\u003e45mm turbo connection diameter eliminates the need to use the problematic factory reducer bushing.\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part featuring a super smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eRetains stock main PCV hose connection location and size for ease of installation. It can be used with the OE PCV hose or any oil catch can system.\u003c\/li\u003e\n\u003cli\u003eRelocates the secondary engine block vent hose connection to the underside of the intake hose to help beautify the MINI’s engine compartment appearance.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation. Direct bolt-on product.\u003c\/li\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors. BLACK | RED | BLUE | GREEN\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.77” [45mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The intake hose is also offered in bundled kits for the R55 through R59 models and the R60-R61 models. These kits include the N18 intake hose, the cold-side elbow kit (56-33020X) and the hot-side turbo charge pipe (56-3M710X or 60-3M710X). \u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442826416374,"sku":"56-318201","price":255.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-318201_2__34718.1753975048.1280.1280.jpg?v=1776220195"},{"product_id":"limited-edition-maxx-flo-air-intake-system-wrinkle-red-housing-red-foam-filter-red-elbow","title":"LIMITED EDITION! MAXX-FLO Air Intake System | Wrinkle Red Housing | Red Foam Filter | Red Elbow","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eLIMITED EDITION - Wrinkle Hacienda Red Housing\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offering for all Generation 2 MINI. It fits all R55 through R59 MINIs with N14 \u0026amp; N18 Turbocharged engines and the R60 Countryman and R61 Paceman. Our system directly replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with this MAXX-FLO(TM) kit is a an 12\" long x 5\" dia \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e 2 stage washable foam filter and a \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED \u003c\/strong\u003e\u003c\/span\u003e100% silicone 4 ply custom connection elbow with all new clamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eWrinkle Hacienda \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eRED\u003c\/span\u003e\u003c\/strong\u003e super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e 12\" long x 5 \" diameter dual stage super high flow\/low restriction washable foam filter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube, not to the delicate plastic (and very expensive) MAF sensor housing. \u003c\/li\u003e\n\u003cli\u003eT\u003c\/li\u003e\n\u003cli\u003eHeat is \u003cstrong\u003eEnemy\u003c\/strong\u003e \u003cstrong\u003eNumber 1\u003c\/strong\u003e under the hood of the R56. We recommend adding our turbo heat shield (PN \u003ca href=\"https:\/\/www.m7tuning.com\/m7-high-performance-turbo-heatshield-r56-r61-2011-2015-n18b-engine\" title=\"N18 Turbo Heat Shield\"\u003e56-330115\u003c\/a\u003e) as part of the installation. The Turbo Heat Shield is sold separately.\u003c\/li\u003e\n\u003cli\u003eEasy 15 minute installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"color: #ff0000; font-size: small;\"\u003e100% Made in The USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTECH NOTES:\u003c\/strong\u003e\u003c\/span\u003e If your vehicle is not equipped with a MAF Sensor (most early non-USA models) you will need the optional MAF Spacer|Adapter to connect properly to stock components on your car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf using a stock scoop, removal of the factory blocking plate is recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is C.A.R.B. approval.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEMISSIONS NOTES:\u003c\/span\u003e\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW C.A.R.B. EO #D-766 listed.  \u003c\/strong\u003e\u003cstrong\u003eLegal for use in all 50 States!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed intake system on your car in all 50 States and legally pass state vehicle inspections. The MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442826711286,"sku":"56-313111","price":317.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-313111_1__21346.1734359680.1280.1280.jpg?v=1776220220"},{"product_id":"engine-components-n18-intake-intercooler-hose-bundle-mini-countryman-paceman-blue","title":"N18 Intake \u0026 Intercooler Hose Bundle | MINI Countryman-Paceman-Blue","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFEED YOUR N18 MINI MORE AIR | MAKE MORE POWER\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eImprove the MINI's breathing capacity by replacing all the restricted intake hose with larger and smoother high flowing parts. We have bundled together in one kit the M7 Speed Intake Hose, Hot Side Turbo Charge Pipe and the Cold Side Elbow Kit. Offered four M7 colors (BLACK, RED, BLUE and GREEN). These are direct bolt-on high performance parts offering superior durability, much better airflow and virtually unlimited service life.  In addition to outstanding performance they look super cool and adds to the under hood WOW factor your MINI so desperately needs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eINTAKE HOSE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe M7 High Flow N18 Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part.  It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose\/turbocharger connection. The common problem of sucking the reducer through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true “direct-fit” bolt-on part for any late model Gen 2 MINI equipped with the N18 engine.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with two electronic replicators that plug directly into the OE electrical harness. Plus all the necessary hardware to make this an easiy DIY install.\u003c\/li\u003e\n\u003cli\u003e45mm turbo connection diameter eliminates the need to use the problematic factory reducer bushing.\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part featuring a super smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eRetains stock main PCV hose connection location and size for ease of installation. It can be used with the OE PCV hose or any oil catch can system.\u003c\/li\u003e\n\u003cli\u003eRelocates the secondary engine block vent hose connection to the underside of the intake hose to help beautify the MINI’s engine compartment appearance.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation. Direct bolt-on product.\u003c\/li\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors. BLACK | RED | BLUE | GREEN\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.77” [45mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHOT-SIDE TURBO CHARGE PIPE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eM7 Pre-Intercooler Charge Pipe\u003c\/strong\u003e is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. \u003cbr\u003e\u003cbr\u003eWith the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!\u003cbr\u003e\u003cbr\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of\u003cstrong\u003e 3.6 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCOLD SIDE INTERCOOLER ELBOW KIT\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts. And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442826809590,"sku":"60-318303","price":487.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/60-318303_1__90410.1734359680.1280.1280.jpg?v=1776220237"},{"product_id":"engine-components-turbo-heat-shield-mini-cooper-n14-18-turbocharged-engine-wrinkle-red","title":"Turbo Heat Shield | MINI Cooper | N14 \u0026 18 Turbocharged Engine | Wrinkle Red","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eLimited Edition Wrinkle Red Finish | Now Available\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis revised design now mounts to the two machined ears on the cylinder head making for a super rigid attachment. The restyled sleek shape adds under hood style to turbocharger area while protecting the plastic hood scoop, paint and applied hood decals from heat damage. Heat shield to hood clearance has been improved eliminating the past interference problems. NOW available in Limited Edition Wrinkle Red powder coat finish.\u003c\/p\u003e\n\u003cp\u003eMade from 0.09in [2.2mm] heavy gauge aluminum material and powder coated in a beautiful Wrinkle Red heat resistant finish. The underside is lined with a custom ceramic thermal blanket to minimize transfer to the hood and top side of the engine compartment. The insulating material has amazing heat insulating qualities. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe M7 Turbo Heat shield is better than anything else on the market:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits both the n14 and N18 MINI Turbocharged engines.\u003c\/li\u003e\n\u003cli\u003eThe M7 Turbo Heat Shield is open on three sides allowing heat to escape down and away from the turbo. Heat rejection is enhanced by the air flow through the radiator. The majority of radiant heat that wants to rise will be reflected down and away from the hood by the M7 insulating heat shield.\u003c\/li\u003e\n\u003cli\u003eThe ceramic material used is a proven thermal insulator which reduces the rate of heat transfer, keeping turbo heat from reaching the rest of the engine bay and your hood, hood scoop and hood decals.\u003c\/li\u003e\n\u003cli\u003eThe M7 heat shield is a very simple DIY installation mounting directly to the engine at two easily accessible factory holes. \u003c\/li\u003e\n\u003cli\u003eThe addition of the M7 Turbo Heat shield adds a finished look to your engine compartment for that added WOW! effect when you lift you hood to show off your to friends or at a local car show.\u003c\/li\u003e\n\u003cli\u003eThe M7 Turbo Heat Shield is used as an additional layer of protection to your hood and hood scoop. Designed as a second layer of defense as is to be used in conjunction with the factory turbo heat shield and not as a replacement.\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware is included. Using pre-existing mounting points in the engine bay eliminates the need to drill or add extra brackets. 15 minutes is the most you'll need!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003ePROUDLY MADE IN THE USA\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442827137270,"sku":"56-330215","price":171.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-330215_1__05156__67052.1739283418.1280.1280.jpg?v=1776220268"},{"product_id":"m7-speed-products-m7-pre-intercooler-charge-pipe-red-r60-countryman-r61-paceman","title":"M7 Pre-Intercooler Charge Pipe | Red | R60 Countryman - R61 Paceman","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThe M7 Pre-Intercooler Charge Pipe is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eWith the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 3.6 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eIncrease your MINI's performance, awaken the pure turbo sound while sprucing up the engine bay. \u003cstrong\u003eAvailable in BLACK | \u003cspan style=\"color: #ff0000;\"\u003eRED\u003c\/span\u003e | \u003cspan style=\"color: #0000ff;\"\u003eBLUE | \u003cspan style=\"color: #00ff00;\"\u003eGREEN\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442828546294,"sku":"60-3M7102","price":154.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/60-3M7102_2__90210.1753975015.1280.1280.jpg?v=1776220297"},{"product_id":"engine-components-high-flow-silicone-intake-hose-n18-mini-cooper-red","title":"High Flow Silicone Intake Hose N18 MINI Cooper-Red","description":"\u003cp\u003e100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the later model N18 turbocharged Prince engine. Offered in the four standard M7 colors (BLACK, RED, BLUE and GREEN). \u003c\/p\u003e\n\u003cp\u003eThe M7 High Flow Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part.  It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose\/turbocharger connection. The common occurring event of sucking this part through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true “direct-fit” bolt-on part for any late model Gen 2 MINI equipped with the N18 engine. In addition to outstanding performance and the aforementioned design improvements it looks super cool and adds the under hood WOW factor MINI so desperately need.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with two electronic replicators that plug directly into the OE electrical harness. Plus everything needed for an easy install.\u003c\/li\u003e\n\u003cli\u003e45mm turbo connection diameter eliminates the need to use the problematic factory reducer bushing.\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part featuring a super smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eRetains stock main PCV hose connection location and size for ease of installation. It can be used with the OE PCV hose or any oil catch can system.\u003c\/li\u003e\n\u003cli\u003eRelocates the secondary engine block vent hose connection to the underside of the intake hose to help beautify the MINI’s engine compartment appearance.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation. Direct bolt-on product.\u003c\/li\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors. BLACK | RED | BLUE | GREEN\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.77” [45mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The intake hose is also offered in bundled kits for the R55 through R59 models and the R60-R61 models. These kits include the N18 intake hose, the cold-side elbow kit (56-33020X) and the hot-side turbo charge pipe (56-3M710X or 60-3M710X). \u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442828644598,"sku":"56-318202","price":255.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/1__84556.1734359682.1280.1280.png?v=1776220333"},{"product_id":"limited-edition-maxx-flo-air-intake-system-wrinkle-red-housing-pleated-red-filter-red-elbow","title":"LIMITED EDITION! MAXX-FLO Air Intake System | Wrinkle Red Housing | Pleated Red Filter | Red Elbow","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eLIMITED EDITION - Wrinkle Hacienda Red Housing\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offering for all Generation 2 MINI. It fits all R55 through R59 MINIs with N14 \u0026amp; N18 Turbocharged engines and the R60 Countryman and R61 Paceman. Our system directly replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with this MAXX-FLO(TM) kit is a an 8\" long x 6\" dia \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e pleated and washable filter and a \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED \u003c\/strong\u003e\u003c\/span\u003e100% silicone 4 ply custom connection elbow with all new clamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eWrinkle Hacienda \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eRED\u003c\/span\u003e\u003c\/strong\u003e super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e 8\" long x 6\" diameter super high flow\/low restriction washable pleated filter. (K\u0026amp;N style)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eRED\u003c\/strong\u003e\u003c\/span\u003e 100% silicone 4 ply custom connection elbow\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube, not to the delicate plastic (and very expensive) MAF sensor housing. \u003c\/li\u003e\n\u003cli\u003eHeat is \u003cstrong\u003eEnemy\u003c\/strong\u003e \u003cstrong\u003eNumber 1\u003c\/strong\u003e under the hood of the R56. We recommend adding our turbo heat shield (PN \u003ca href=\"https:\/\/www.m7tuning.com\/m7-high-performance-turbo-heatshield-r56-r61-2011-2015-n18b-engine\" title=\"N18 Turbo Heat Shield\"\u003e56-330115\u003c\/a\u003e) as part of the installation. The Turbo Heat Shield is sold separately.\u003c\/li\u003e\n\u003cli\u003eEasy 15 minute installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"color: #ff0000; font-size: small;\"\u003e100% Made in The USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTECH NOTES:\u003c\/strong\u003e\u003c\/span\u003e If your vehicle is not equipped with a MAF Sensor (most early non-USA models) you will need the optional MAF Spacer|Adapter to connect properly to stock components on your car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf using a stock scoop, removal of the factory blocking plate is recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is C.A.R.B. approval.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEMISSIONS NOTES:\u003c\/span\u003e\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW C.A.R.B. EO #D-766 listed.  \u003c\/strong\u003e\u003cstrong\u003eLegal for use in all 50 States!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed intake system on your car in all 50 States and legally pass state vehicle inspections. The MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442829136118,"sku":"56-313112","price":349.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-313112_1__52964.1734359677.1280.1280.jpg?v=1776220351"},{"product_id":"m7-speed-products-m7-pre-intercooler-charge-pipe-blue-r60-countryman-r61-paceman","title":"M7 Pre-Intercooler Charge Pipe | Blue | R60 Countryman - R61 Paceman","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThe M7 Pre-Intercooler Charge Pipe is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eWith the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 3.6 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eIncrease your MINI's performance, awaken the pure turbo sound while sprucing up the engine bay. \u003cstrong\u003eAvailable in BLACK | \u003cspan style=\"color: #ff0000;\"\u003eRED\u003c\/span\u003e | \u003cspan style=\"color: #0000ff;\"\u003eBLUE | \u003cspan style=\"color: #00ff00;\"\u003eGREEN\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; color: #000000;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442829234422,"sku":"60-3M7103","price":154.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/60-3M7103_1__44183.1753974975.1280.1280.jpg?v=1776220397"},{"product_id":"m7-speed-products-n18-intake-intercooler-hose-bundle-mini-countryman-paceman-green","title":"N18 Intake \u0026 Intercooler Hose Bundle | MINI Countryman-Paceman-Green","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFEED YOUR N18 MINI MORE AIR | MAKE MORE POWER\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eImprove the MINI's breathing capacity by replacing all the restricted intake hose with larger and smoother high flowing parts. We have bundled together in one kit the M7 Speed Intake Hose, Hot Side Turbo Charge Pipe and the Cold Side Elbow Kit. Offered four M7 colors (BLACK, RED, BLUE and GREEN). These are direct bolt-on high performance parts offering superior durability, much better airflow and virtually unlimited service life.  In addition to outstanding performance they look super cool and adds to the under hood WOW factor your MINI so desperately needs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eINTAKE HOSE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe M7 High Flow N18 Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part.  It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose\/turbocharger connection. The common problem of sucking the reducer through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true “direct-fit” bolt-on part for any late model Gen 2 MINI equipped with the N18 engine.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with two electronic replicators that plug directly into the OE electrical harness. Plus all the necessary hardware to make this an easiy DIY install.\u003c\/li\u003e\n\u003cli\u003e45mm turbo connection diameter eliminates the need to use the problematic factory reducer bushing.\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part featuring a super smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eRetains stock main PCV hose connection location and size for ease of installation. It can be used with the OE PCV hose or any oil catch can system.\u003c\/li\u003e\n\u003cli\u003eRelocates the secondary engine block vent hose connection to the underside of the intake hose to help beautify the MINI’s engine compartment appearance.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation. Direct bolt-on product.\u003c\/li\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors. BLACK | RED | BLUE | GREEN\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.77” [45mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHOT-SIDE TURBO CHARGE PIPE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eM7 Pre-Intercooler Charge Pipe\u003c\/strong\u003e is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. \u003cbr\u003e\u003cbr\u003eWith the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!\u003cbr\u003e\u003cbr\u003eOn the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of\u003cstrong\u003e 3.6 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCOLD SIDE INTERCOOLER ELBOW KIT\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts. And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442829889782,"sku":"60-318304","price":487.62,"currency_code":"USD","in_stock":false}]},{"product_id":"engine-components-high-flow-silicone-intake-hose-n18-mini-cooper-blue","title":"High Flow Silicone Intake Hose N18 MINI Cooper-Blue","description":"\u003cp\u003e100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the later model N18 turbocharged Prince engine. Offered in the four standard M7 colors (BLACK, RED, BLUE and GREEN). \u003c\/p\u003e\n\u003cp\u003eThe M7 High Flow Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part.  It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose\/turbocharger connection. The common occurring event of sucking this part through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true “direct-fit” bolt-on part for any late model Gen 2 MINI equipped with the N18 engine. In addition to outstanding performance and the aforementioned design improvements it looks super cool and adds the under hood WOW factor MINI so desperately need.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with two electronic replicators that plug directly into the OE electrical harness. Plus everything needed for an easy install.\u003c\/li\u003e\n\u003cli\u003e45mm turbo connection diameter eliminates the need to use the problematic factory reducer bushing.\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part featuring a super smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eRetains stock main PCV hose connection location and size for ease of installation. It can be used with the OE PCV hose or any oil catch can system.\u003c\/li\u003e\n\u003cli\u003eRelocates the secondary engine block vent hose connection to the underside of the intake hose to help beautify the MINI’s engine compartment appearance.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation. Direct bolt-on product.\u003c\/li\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors. BLACK | RED | BLUE | GREEN\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.77” [45mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The intake hose is also offered in bundled kits for the R55 through R59 models and the R60-R61 models. These kits include the N18 intake hose, the cold-side elbow kit (56-33020X) and the hot-side turbo charge pipe (56-3M710X or 60-3M710X). \u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442831266038,"sku":"56-318203","price":255.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/2__33413.1734359685.1280.1280.png?v=1776220449"},{"product_id":"engine-components-lower-cold-side-intercooler-elbow-black","title":"Lower Cold Side Intercooler Elbow | Black","description":"\u003cp\u003eM7 Speed introduces their new Cold Side Lower Intercooler Elbow for all Generation 2 MINI Coopers equipped with a 1.6 liter turbocharged engine. This new OE replacement elbow is made from the same high quality four-ply fabric reinforced 100% silicone material as our other very popular silicone hose products. While the shape and size match the factory piece the M7 elbow differs in one big way. Since the M7 part is made on mandrel tooling the bend is much smoother and larger than the convoluted molded rubber OE part.  .\u003c\/p\u003e\n\u003cp\u003eThis is a direct factory OE replacement part with no modifications required for installation. It replaces the OE rubber elbow that fails over time because of age, reaction with oils, high boost applications and environmental damage or punctures from underbody run-ins with road hazards.  Perfect for high performance MINIs who are running increased boost.  Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure. The kit comes complete with one silicone elbow and two high quality lined stainless steel clamps.  Currently only available in BLACK. The elbow is easy to install by any moderately skilled DIY car enthusiast using basic hand tools.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on OE replacement. No modifications required.\u003c\/li\u003e\n\u003cli\u003eOE part is not available from MINI\u003c\/li\u003e\n\u003cli\u003eFour ply 100% silicone construction.\u003c\/li\u003e\n\u003cli\u003eEliminates OE hose failure caused by age, environmental exposure, heat and high boost pressure.\u003c\/li\u003e\n\u003cli\u003eAvailable in \u003cb\u003eBLACK \u003c\/b\u003eonly (colors will be available in the future)\u003c\/li\u003e\n\u003cli\u003eEasy to install with basic hand tools.\u003c\/li\u003e\n\u003cli\u003eComes with two stainless steel lined hose clamps.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442832019702,"sku":"56-330251","price":80.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-330251-3__86169.1734359686.1280.1280.jpg?v=1776220483"},{"product_id":"engine-components-n14-high-flow-intake-hose-mini-cooper","title":"N14 High Flow Intake Hose | MINI Cooper","description":"\u003cp\u003eNow available is M7 Speed's newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. Offered four standard M7 colors (BLACK, RED, BLUE and GREEN). This is a direct bolt-on OE replacement part offering superior durability, much better airflow and virtually unlimited service life.  In addition to outstanding performance it looks super cool and adds the under hood WOW factor your MINI so desperately needs.\u003c\/p\u003e\n\u003cp\u003eUnlike other similar hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size allowing the OE hose and connector to be installed without any modifications.  This includes no disruption of the PCV electrical connection eliminating any chance of initiating a DTC code (Check Engine Light). The kit comes complete with three properly sized stainless steel clamps and easy to follow installation instructions. Please note this part only fits MINIs equipped with the N14 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover.  Vehicles with one large PCV vent hose and one small secondary PCV hose will use a different part number. Coming Soon.\u003c\/p\u003e\n\u003cp\u003e \u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFEATURES\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 100% Silicone materials resistant to oil and most chemical damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for high temperature {300\u003csup\u003eo\u003c\/sup\u003eF [149\u003csup\u003eo\u003c\/sup\u003eC]} continuous service.\u003c\/li\u003e\n\u003cli\u003eFour-ply fiber reinforced construction for maximum strength and durability.\u003c\/li\u003e\n\u003cli\u003eRetains stock PCV connection location and size for ease of installation.\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required for installation.\u003c\/li\u003e\n\u003cli\u003e33% larger inside flow volume compared to the stock part.\u003c\/li\u003e\n\u003cli\u003eSuper smooth inner flow surface and transitions promoting better airflow to the turbocharger.\u003c\/li\u003e\n\u003cli\u003eAvailable in four standard M7 colors.\u003c\/li\u003e\n\u003cli\u003e2.75” [70mm] ID at the MAF sensor. 1.73 [44mm] ID at the turbo inlet.\u003c\/li\u003e\n\u003cli\u003eEasy DIY installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe intake hose is also offered in bundled kits, which include the intake hose, the cold-side elbow kit (56-33020X) and the hot-side turbo charge pipe (56-3M730X). These new kit part numbers are; 56-314301 BLACK | 56-314302 RED | 56-314303 BLUE | 56-314304 GREEN.\u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50723565338870,"sku":"56-31420","price":197.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-31420_1__00139.1734359686.1280.1280.jpg?v=1776220500"},{"product_id":"maxx-performance-engine-power-kit-r55-r59-gen-2-turbocharged-mini-cooper","title":"MAXX Performance Engine Power Kit | R55-R59 GEN 2 Turbocharged MINI Cooper","description":"\u003cp\u003e\u003cspan style=\"font-size: medium; color: #ff0000;\"\u003e\u003cstrong\u003eMAXX PERFORMANCE ENGINE POWER KIT | \u003c\/strong\u003e\u003cstrong\u003eBundle and Save $$$\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003e*****NOTE: THIS KIT DOES NOT INCLUDE A MAXXBOOST ECU TUNE*****\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003cspan style=\"color: #000000; font-size: small;\"\u003e\u003cstrong\u003eTHE MAXX PERFORMANCE ENGINE POWER KIT INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAXX-FLO Intake - \u003c\/strong\u003eFilter and Color Options Available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM7 Hot Side Turbo Charge Pipe Kit -\u003c\/strong\u003e Color Options Available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM7 Cold Side High Flow Elbow Kit \u003cstrong\u003e \u003c\/strong\u003e\u003c\/strong\u003e- Color Options Available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM7 Turbo Heat Shield - \u003c\/strong\u003eFinish Options available\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eM7 Aluminum Oil Catch Can Kit\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMilltek Stainless Steel Downpipe with High Flow Catalytic Converter\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWagner Competition Intercooler \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNGK Iridium Plus Spark Plugs (Set of 4)\u003c\/strong\u003e Choice of Standard or +1 Colder Heat Range\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBOSCH Performance Coil (Set of 4) \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional options available at check out-Build your own system for a custom look and superior performance\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eNOTE: This kit DOES NOT include a MAXXBoost Tune.  For complete engine performance kits WITH MAXXBoost Tunes CLICK HERE\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the Generation 2 Turbo R55-R59 cars we have bundled nine of our most popular engine performance products into an affordable and easy to install kit. These components add power, great turbo sound and awesome under hood looks to your MINI Cooper.  Design your own kit...many color options are available. Save big $$$$ when you buy as a bundle!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eMAXX-FLO Intake:\u003c\/em\u003e\u003c\/span\u003e \u003c\/strong\u003e\u003c\/span\u003eThe \u003cstrong\u003eM7 Speed MAXX-FLO (TM) \u003c\/strong\u003efresh air system is our newest offereing for all Generation 2 MINI. It fits all R55 through R59 MINIs with N14 \u0026amp; N18 Turbocharged engines and the R60 Countryman and R61 Paceman. Our system directly replaces the restrictive stock air box with a precision fabricated aluminum frame that securely connects into the factory mounting points for simple installation. The M7 design eliminates all the problems found on other aftermarket systems. Included with every MAXX-FLO(TM) kit is our proven low restriction foam air filter which adds more air flow, engine performance and great sound to your beloved MINI.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy heavy gauge aluminum \u0026amp; TIG welded construction.\u003c\/li\u003e\n\u003cli\u003eMatte black super durable powder coat finish with a laser cut stainless steel M7 medallion. \u003c\/li\u003e\n\u003cli\u003e12\" long x 5 \" diameter dual stage super high flow\/low restriction washable foam filter that will outflow any air demand your engine will ever need. \u003c\/li\u003e\n\u003cli\u003eOPTIONAL: 8\" long x 6\" dia pleated washable filter is available\u003c\/li\u003e\n\u003cli\u003eThe 100% silicone connection elbow fits perfectly to the factory MAF housing. Available in 4 color choices \u003cstrong\u003e| BLACK | BLUE | RED | GREEN\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUnlike other systems on the market the MAF sensor stays in the stock location. No modifications necessary.\u003c\/li\u003e\n\u003cli\u003eThe air filter element securely mounts to a sturdy metal adapter tube with a locking bead feature so the filter does not fall off.\u003c\/li\u003e\n\u003cli\u003eEase of installation\u003c\/li\u003e\n\u003cli\u003eMade in The USA\u003c\/li\u003e\n\u003cli\u003eIf using a stock scoop, removal of the factory blocking plate is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eEMISSIONS NOTE: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eMAXX-FLO Intake System is now C.A.R.B. EO #D-766 listed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC.A.R.B. EO # D-766 allows you to legally purchase, install and use the M7 Speed MAXX-FLO Performance Intake System on your car in all 50 States and leagally pass state vehicle inspections. The M7 Speed MAXX-FLO Performance Intake System can be used on all Gen 2 Turbocharged MINIs through 2013 model year. This product has received a California Air Resources Board Executive Order (CARB EO) number, exempting it from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. #D-766 number allows you to legally use the M7 Speed intake system on your car in all 50 States.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003eM7 SPEED HOT SIDE TURBO CHARGE PIPE: \u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003eThe M7 Pre-Intercooler Charge Pipe is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. With the M7 Hot-Side Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it. On the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 3.6 horsepower and 11.3 ft-lb of torque \u003cem\u003eAT THE WHEELS\u003c\/em\u003e! Increase your MINI's performance, awaken the pure turbo sound while sprucing up the engine bay.\u003cstrong\u003eAvailable in BLACK | RED | BLUE | GREEN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003eM7 SPEED COLD SIDE HIGH FLOW ELBOW KIT: \u003c\/strong\u003e\u003cstrong\u003eFEED YOUR MACHINE MORE AIR | MAKE MORE\u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e POWER:\u003c\/strong\u003e\u003c\/span\u003e M7 Speed introduces its new COLD SIDE Intercooler Elbow Kit. Made from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe.  Available in four (4) popular colors \u003cstrong\u003eBLACK\u003c\/strong\u003e, \u003cstrong\u003eRED\u003c\/strong\u003e, \u003cstrong\u003eBLUE\u003c\/strong\u003e and\u003cstrong\u003e GREEN\u003c\/strong\u003e. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts.  And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.\u003c\/p\u003e\n\u003cp\u003eThe kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003eM7 SPEED TURBO HEAT SHIELD: \u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003eThe M7 Turbo Heat shield is designed to fit over the stock turbo using pre-existing mounting points. It's lined with a custom nano ceramic thermal blanket to minimize the heat flowing to the rest of the engine bay. The thinner insulating material has amazing heat rejection qualities. It is the same material and blanket construction used on all NASCAR and endurance race cars who generate huge amounts of heat at very high temperatures for sustained periods of time. That is why we have chosen this material. IT IS PROVEN AND IT WORKS!\u003c\/p\u003e\n\u003cp\u003eThe M7 Turbo Heat shield is better than anything else on the market for a number of reasons:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not completely encase the turbocharger as some have assumed (the turbocharger hot section is actually fully wrapped in its own, factory installed heat shield). The OEM heat shield is ineffective at preventing long term hood paint and hood scoop damage.\u003c\/li\u003e\n\u003cli\u003eThe M7 Turbo Heat Shield is open on three sides allowing heat to escape down and away from the turbo. Heat rejection is enhanced by the air flow through the radiator. The majority of radiant heat that wants to rise will be reflected down and away from the hood by the M7 insulating heat shield.\u003c\/li\u003e\n\u003cli\u003eAll material will heat soak when exposed to higher temperatures (due to hard driving) and all material will eventually heat up. The factory installed heat shield has a limited ability to insulate the the hood from the turbo heat. Thus, the addition of the M7 Turbo Heat Shield is a huge benefit as it adds a second high performance layer of heat protection and will delay the time it takes for the destructive heat to harm your scoop, hood paint and heat soak the engine compartment\u003c\/li\u003e\n\u003cli\u003eThe M7 heat shield is a very simple installation using 2 easily accessible factory holes. Installation of the M7 Turbo Heat Shield DOES NOT require you to remove the bolts to the engine's cam cover.\u003c\/li\u003e\n\u003cli\u003eThe addition of the M7 Turbo Heat shield adds a finished look to your engine compartment for that added WOW! effect with the Mirror Polished finish or the Matte Black finish when you show off your MINI to friends or at a local car show.\u003c\/li\u003e\n\u003cli\u003eUsed as an additional layer of protection to your hood and hood scoop. Designed as a second layer of defense as is to be used in conjunction with the factory turbo heat shield and not as a replacement.\u003c\/li\u003e\n\u003cli\u003e All necessary mounting hardware is included. Using pre-existing mounting points in the engine bay eliminates the need to drill or add extra brackets. 15-25 minutes is the most you'll need!\u003c\/li\u003e\n\u003cli\u003eMADE IN THE USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003eMILLTEK HIGH FLOW DOWNPIPE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e\u003c\/em\u003e The Milltek high flow 200 CPI Performance catted downpipe WITH High Flow Catalytic Converter*** from MILLTEK.\u003c\/p\u003e\n\u003cp\u003eBoth downpipes are constructed from 2.5\" diameter high quality 304 aircraft grade stainless steel. Mandrel bending ensures full flow bends for better gas flow. The top connection to the turbo is a high quality permanent mold stainlees steel casting to eliminate any cracking no matter how hot you run your turbo. This is the only pipe available with this high quality feature. Includes welded in bungs for two OE located O2 sensors.\u003c\/p\u003e\n\u003cp\u003eThis product \u003cstrong\u003eMUST\u003c\/strong\u003e be combined with a Stage 2 Tune or a check engine light (CEL) will come on. \u003cem\u003e\u003cstrong\u003eWith a MAXXBoost Stage 2 Tune the CEL for aftermarket catalytic converter is eliminated.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***This product is not C.A.R.B. registered\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eM7 OIL CATCH CAN:\u003c\/span\u003e \u003c\/strong\u003e\u003c\/em\u003eBy capturing excess oil vapor and particles, the M7 Oil Catch Can ensures that oil film and sludge will not become a factor in your vehicle's performance. If you don't think your engine is pumping oil back through your intake system, remove the breather tube and look at all the oil!.  The breather tube connects directly to you intake hose and directs this oily mess back through your engine to be burned.\u003c\/p\u003e\n\u003cp\u003e Now with our exclusive \"Exact-Fit\" pre-assembled hose kit and brackets makes installation super-easy for the DIYer\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBright black anodized Billet Aluminum. Carbon Fiber optional.\u003c\/li\u003e\n\u003cli\u003ePre-assembled hose assemblies\u003c\/li\u003e\n\u003cli\u003eHelp prevent internal engine distruction caused by hot-spot detonation.\u003c\/li\u003e\n\u003cli\u003eStainless steel bracket and mounting hardware\u003c\/li\u003e\n\u003cli\u003eEliminate intake tract oil contamination and intake valve damage.\u003c\/li\u003e\n\u003cli\u003ePrevent pre-mature sensor failure\u003c\/li\u003e\n\u003cli\u003eKeep engine performance at peak levels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe M7 Oil Catch Can is not only functional is a work of automotive performance ART! It is CNC machined from billet aluminum and adds a sharp look to your engine compartment.\u003c\/p\u003e\n\u003cp\u003eAll hoses, brackets, clamps, necessary fittings and easy to follow detailed step-by-step instructions are included, including an oil drain plug and an easy to view sight tube. The sight tube lets you know the amount of oil in the can. The hoses are high quality \"Made in the USA\" automotive grade designed to withstand the rigors of the under-hood environment and to not degrade when exposed to oil. Beware of other \"low cost\" catch can systems that use silicone hoses because oil and silicone are not compatible. Silicone hoses will will eventually deteriorate and make an absolute mess of your engine compartment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eWagner Competition Intercooler:\u003c\/em\u003e\u003c\/span\u003e \u003c\/strong\u003eThe Wagner-Tuning Competition intercooler is highly regarded in the German performance car aftermarket for brands like Audi, BMW, Porsche and VW.  It features full German CAD based design, cast aluminum end tanks (not welded sheet metal) which gives the highest flow with the lowest pressure drop, furnace brazed bar and plate core design all skillfully welded together to create a fantastic product.  No wonder all the German performance car forums are abuzz about Wagner-Tuning intercoolers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance \"Tube Fin\" Intercooler core with turbulators in a stepped design\u003c\/li\u003e\n\u003cli\u003eStepped design for maximum volume and minimum pressure drop.\u003c\/li\u003e\n\u003cli\u003eCast aluminum CAD \/ FEA optimized air tanks\u003c\/li\u003e\n\u003cli\u003eIntercooler uses the original mounting points\u003c\/li\u003e\n\u003cli\u003e~220% larger frontal area compared to OEM intercooler\u003c\/li\u003e\n\u003cli\u003e~280% greater volume than OEM charge air intercooler\u003c\/li\u003e\n\u003cli\u003eSimple installation\u003c\/li\u003e\n\u003cli\u003eOptional Competition model weighs only 11lbs\/5kg\u003c\/li\u003e\n\u003cli\u003eIntercooler is painted matte black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x 14mm stainless steel clamps \u003c\/li\u003e\n\u003cli\u003eComplete Mounting Kit\u003c\/li\u003e\n\u003cli\u003eInstallation Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES: \u003c\/strong\u003eBecause of the large size of the Competition intercooler some very minor trimming \u0026amp; modifications behind the bumper and grill may be required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eNGK Laser Iridium Spark Plugs:\u003c\/em\u003e\u003c\/span\u003e \u003c\/strong\u003e\u003c\/strong\u003eThe top choice of professional MINI performance tuners. Standard heat range is recommended for all street driven applications. +1 Colder spark plugs are only recommended for sustained high RPM driving \u0026amp; track use situations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eBOSCH High Performance Ignition Coils:\u003c\/em\u003e\u003c\/span\u003e \u003c\/strong\u003eInstall a set of Bosch High Performance high voltage ignition coils and the problematic high speed, high load misfire is eliminated. You will be surprised with the new found power and smoother performance all the way to REDLINE.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**PERFORMANCE RESULTS: \u003c\/strong\u003eThe actual performance gains (Horsepower \u0026amp; Torque) you achieve are dependent on vehicle condition, mileage, maintenance history, modifications, lubricants, aftermarket parts, performance map selected, fuel quality \u0026amp; octane, air temperature, atmospheric pressure (altitude) and other regional factors. Dynamometer type, condition, calibration and correction factors will also affect performance test results! Horsepower gains advertised are only a reference. Your actual results may be different.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442833789174,"sku":"56-373102","price":3016.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-373102_1__96578.1734359702.1280.1280.jpg?v=1776220609"},{"product_id":"engine-components-lower-cold-side-intercooler-elbow-red","title":"Lower Cold Side Intercooler Elbow | Red","description":"\u003cp\u003eM7 Speed introduces their new Cold Side Lower Intercooler Elbow for all Generation 2 MINI Coopers equipped with a 1.6 liter turbocharged engine. This new OE replacement elbow is made from the same high quality four-ply fabric reinforced 100% silicone material as our other very popular silicone hose products. While the shape and size match the factory piece the M7 elbow differs in one big way. Since the M7 part is made on mandrel tooling the bend is much smoother and larger than the convoluted molded rubber OE part.  .\u003c\/p\u003e\n\u003cp\u003eThis is a direct factory OE replacement part with no modifications required for installation. It replaces the OE rubber elbow that fails over time because of age, reaction with oils, high boost applications and environmental damage or punctures from underbody run-ins with road hazards.  Perfect for high performance MINIs who are running increased boost.  Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure. The kit comes complete with one silicone elbow and two high quality lined stainless steel clamps.  Currently only available in BLACK. The elbow is easy to install by any moderately skilled DIY car enthusiast using basic hand tools.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on OE replacement. No modifications required.\u003c\/li\u003e\n\u003cli\u003eOE part is not available from MINI\u003c\/li\u003e\n\u003cli\u003eFour ply 100% silicone construction.\u003c\/li\u003e\n\u003cli\u003eEliminates OE hose failure caused by age, environmental exposure, heat and high boost pressure.\u003c\/li\u003e\n\u003cli\u003eAvailable in \u003cb\u003eBLACK \u003c\/b\u003eonly (colors will be available in the future)\u003c\/li\u003e\n\u003cli\u003eEasy to install with basic hand tools.\u003c\/li\u003e\n\u003cli\u003eComes with two stainless steel lined hose clamps.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M7 Speed","offers":[{"title":"Default Title","offer_id":50442833821942,"sku":"56-330252","price":80.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/3815\/0902\/files\/56-330252-1__99712.1734359702.1280.1280.png?v=1776220625"}],"url":"https:\/\/m7tuning.com\/collections\/fitment-buckets-gen-1-mini-engine-components.oembed","provider":"M7 Tuning","version":"1.0","type":"link"}